Infineon TLE8110EDXUMA1 Low Side 8, Low Side Power Switch IC 36-Pin, DSO-36

RS 제품 번호:: 229-1912
제조사 부품 번호:: TLE8110EDXUMA1
제조업체:: Infineon

Infineon TLE8110EDXUMA1 Low Side 8, Low Side Power Switch IC 36-Pin, DSO-36

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩13,980.00

913 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 9	₩13,980.00
10 - 99	₩13,620.00
100 - 249	₩13,300.00
250 - 499	₩12,960.00
500 +	₩12,640.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 229-1912
제조사 부품 번호:: TLE8110EDXUMA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	Power Switch IC
	Power Switch Topology	Low Side
	Power Switch Type	Low Side
	Switch On Resistance RdsOn	1.2nΩ
	Number of Outputs	10
	Number of Inputs	8
	Interface Type	Parallel, SPI
	Mount Type	Surface
	Minimum Supply Voltage	3V
	Package Type	DSO-36
	Maximum Supply Voltage	5.5V
	Pin Count	36
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	150°C
	Operating Current	0.002A
	Width	10.3mm
	Height	2.5mm
	Length	10.3mm
	Standards/Approvals	No
	Automotive Standard	AEC
	Series	TLE8110ED

	모두 선택
	브랜드 Infineon
	Product Type Power Switch IC
	Power Switch Topology Low Side
	Power Switch Type Low Side
	Switch On Resistance RdsOn 1.2nΩ
	Number of Outputs 10
	Number of Inputs 8
	Interface Type Parallel, SPI
	Mount Type Surface
	Minimum Supply Voltage 3V
	Package Type DSO-36
	Maximum Supply Voltage 5.5V
	Pin Count 36
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 150°C
	Operating Current 0.002A
	Width 10.3mm
	Height 2.5mm
	Length 10.3mm
	Standards/Approvals No
	Automotive Standard AEC
	Series TLE8110ED

Datasheet - TLE8110EDXUMA1

Infineon TLE8110ED Series Power Switch IC, 5.5V Maximum Supply Voltage, 10 Outputs - TLE8110EDXUMA1

This power switch IC is a low-side automotive switching device designed for control of multiple loads in vehicles. It operates within automotive voltage levels and is intended for surface-mounted installations where parallel or serial peripheral Interface control is required. The component is developed to function across extended temperature conditions typical of automotive environments.

Features and Benefits:

• Low-side topology delivers controlled switching for ground-side loads
• Operates from 3 V to 5.5 V for compatibility with common vehicle rails
• Ten outputs enable Compact multi-load management in one package
• Eight inputs provide flexible control signals for complex systems
• Very low Rds(on) of 1.2 nΩ minimises conduction losses
• Rated for operation up to 150 °C for high-temperature durability

Applications

• Suitable for body electronics switching tasks in vehicles
• Ideal for multiplexed low-side load distribution systems
• Used for lamp and actuator control requiring multiple outputs
• Can be used for gateway or module integration with SPI control
• Used with surface-mount module assemblies on automotive boards

How is communication with the device achieved?

It supports both parallel signalling and an SPI bus for control.

What mounting method should be used on assemblies?

Surface-mount placement is specified for PCB integration.

How many pins are available for board routing?

The package provides 36 pins for electrical and mechanical connections.

What thermal range can be expected during operation?

It is specified to operate between −40 °C and 150 °C.

What is the device's steady-state operating current?

The operating current is 0.002 A under standard conditions.