The FUSB303 device is a fully autonomous USB Type−C™ controller optimized for 15 W or less applications. The FUSB303 offers CC logic detection for Source Port role, Sink Port role, DRP, and accessory detection support, as well as Dead Battery support as defined in USB−C specifications. The FUSB303 features configurable address I2C access to support multiple ports per system or it can operate autonomously configured by just pins.

Fully Autonomous USB−C™ Port Controller
Supports Latest Type−C™ Specification Release 1.3
Source, Sink, and DRP Port role Configuration with Optional Accessory Support
Try.SRC and Try.SNK modes for Preferring Source Role or Sink Role Respectively
VDD Operating Range, 2.85 V − 5.5 V
Typical Low Power Operation: ICC < 10μA
GPIO and I2C Configuration
Max 28 V DC Tolerance on ID, VBUS_DET, CC1 and CC2
Dead Battery Support (Sink Port role when No Power Applied)
4 kV HBM ESD Protection for Connector Pins

수량	한팩당	한팩당*
50 - 1200	₩520.76	₩26,075.60
1250 - 2450	₩509.48	₩25,511.60
2500 +	₩498.20	₩24,947.60

모두 선택	제품 정보	값
	브랜드	onsemi
	Power Switch Type	USB
	Maximum Operating Supply Voltage	22 V
	Number of Outputs	1
	Mounting Type	Surface Mount
	Package Type	QFN
	Pin Count	12
	Maximum Operating Temperature	+85 °C
	Minimum Operating Temperature	-40 °C
	Dimensions	1.65 x 1.65 x 0.35mm

	모두 선택
	브랜드 onsemi
	Power Switch Type USB
	Maximum Operating Supply Voltage 22 V
	Number of Outputs 1
	Mounting Type Surface Mount
	Package Type QFN
	Pin Count 12
	Maximum Operating Temperature +85 °C
	Minimum Operating Temperature -40 °C
	Dimensions 1.65 x 1.65 x 0.35mm

onsemi FUSB303TMX, USB Power Switch IC 12-Pin, QFN

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

관련된 링크들