Infineon BTS3800SLHTSA1 Low Side 1, Low Side Power Switch Power Switch IC 5-Pin, SCT595

RS 제품 번호:: 165-6505
제조사 부품 번호:: BTS3800SLHTSA1
제조업체:: Infineon

Infineon BTS3800SLHTSA1 Low Side 1, Low Side Power Switch Power Switch IC 5-Pin, SCT595

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 3000 units)*

₩2,088,000.00

일시적 품절

6,000 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 - 12000	₩696.00	₩2,088,000.00
15000 +	₩682.00	₩2,046,000.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 165-6505
제조사 부품 번호:: BTS3800SLHTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Power Switch Type	Low Side Power Switch
	Power Switch Topology	Low Side
	Product Type	Power Switch IC
	Switch On Resistance RdsOn	0.8Ω
	Number of Outputs	5
	Number of Inputs	1
	Mount Type	Surface
	Package Type	SCT595
	Minimum Supply Voltage	-0.3V
	Pin Count	5
	Maximum Supply Voltage	5.5V
	Maximum Operating Temperature	150°C
	Minimum Operating Temperature	-40°C
	Operating Current	4A
	Length	2.9mm
	Height	1mm
	Standards/Approvals	No
	Width	1.6mm
	Automotive Standard	AEC
	Series	HITFET

	모두 선택
	브랜드 Infineon
	Power Switch Type Low Side Power Switch
	Power Switch Topology Low Side
	Product Type Power Switch IC
	Switch On Resistance RdsOn 0.8Ω
	Number of Outputs 5
	Number of Inputs 1
	Mount Type Surface
	Package Type SCT595
	Minimum Supply Voltage -0.3V
	Pin Count 5
	Maximum Supply Voltage 5.5V
	Maximum Operating Temperature 150°C
	Minimum Operating Temperature -40°C
	Operating Current 4A
	Length 2.9mm
	Height 1mm
	Standards/Approvals No
	Width 1.6mm
	Automotive Standard AEC
	Series HITFET

COO (Country of Origin):: MY

Infineon HITFET Series Power Switch IC, 4A Operating Current, 5.5V Maximum Supply Voltage - BTS3800SLHTSA1

This power switch IC is a compact low-side switching device designed for automotive environments. It provides controlled low-side switching for multiple channels and is intended for surface-mounted assemblies in vehicle electronic systems operating up to typical automotive voltages. The component is built to function across a wide junction temperature range and supports multi-output switching in confined board real estate.

Features and Benefits:

• Five outputs enable concurrent load switching and simplified wiring
• 4A operating current supports moderate automotive loads
• 0.8Ω on-resistance minimises conduction losses during operation
• Accepts supply up to 5.5V for common automotive control rails
• Withstands temperatures up to 150°C for harsh under-bonnet conditions

Applications

• Suitable for switching lamps and solenoids in body control modules
• Ideal for multiplexed actuator control in door systems
• Used with vehicle electronics requiring surface-mounted power switches
• Can be used for low-voltage sensor and auxiliary load management

What mounting considerations should I follow for thermal management?

Use adequate PCB copper around the package to dissipate heat and follow manufacturer thermal pad recommendations to maintain junction temperature under high-duty cycles.

How many control inputs does the device require for full operation?

The part provides a single input controlling multiple outputs, enabling simplified logic drive and fewer MCU pins.

What are recommended electrical limits to avoid damage?

Keep supply voltage below 5.5V and ensure no negative excursions beyond -0.3V on input lines to prevent overstress.

Can this device replace discrete MOSFETs in multi-channel designs?

Yes, it provides a compact alternative to individual low-side MOSFETs by integrating five switching channels in one surface-mount package.