제조사부품번호

Omron Power Relay, 120V ac Coil, 15A Switching Current, SPDT

RS 제품 번호:: 828-7191
제조사 부품 번호:: LY1 110/120VAC
제조업체:: Omron

Omron Power Relay, 120V ac Coil, 15A Switching Current, SPDT

Subtotal (1 unit)*

₩20,140.00

추가로 2026년 8월 31일 부터 3 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩20,140.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 828-7191
제조사 부품 번호:: LY1 110/120VAC
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Power Relay
	Coil Voltage	120V ac
	Contact Configuration	SPDT
	Series	LY1
	Terminal Type	Plug-In
	Switching Current	15A
	Minimum Operating Temperature	-25°C
	Switching Power	1.1W
	Switching AC Voltage	125V
	Switching DC Voltage	125V
	Maximum Operating Temperature	55°C
	Coil Resistance	4.4kΩ
	Width	36mm
	Height	28mm
	Coil Power	1.1W
	Length	21.5mm
	Standards/Approvals	UL, CSA
	Contact Material	Silver Alloy
	Contact Resistance	50mΩ

	모두 선택
	브랜드 Omron
	Product Type Power Relay
	Coil Voltage 120V ac
	Contact Configuration SPDT
	Series LY1
	Terminal Type Plug-In
	Switching Current 15A
	Minimum Operating Temperature -25°C
	Switching Power 1.1W
	Switching AC Voltage 125V
	Switching DC Voltage 125V
	Maximum Operating Temperature 55°C
	Coil Resistance 4.4kΩ
	Width 36mm
	Height 28mm
	Coil Power 1.1W
	Length 21.5mm
	Standards/Approvals UL, CSA
	Contact Material Silver Alloy
	Contact Resistance 50mΩ

COO (Country of Origin):: ID

Omron LY1 Series Power Relay, 120V AC Coil Voltage, 15A Switching Current - LY1 110/120VAC

This power relay is a Compact electromechanical switching component designed for general control and automation tasks where a single-pole changeover contact is required. It operates from an AC Coil and is intended for panel-mounted or socketed installations in industrial electrical and electronic systems, providing isolation between control circuits and switched loads.

Features and Benefits:

• 120V AC Coil rated at 1.1 W for low-power control circuits
• 4 430 Ω Coil resistance enabling predictable drive requirements
• SPDT contact arrangement allowing changeover switching in one device
• Silver-alloy contacts supporting up to 15A switching current
• Plug-in Terminal format for Rapid replacement and maintenance

Applications

• Suitable for motor control contact sequencing in factory equipment
• Ideal for switching lighting circuits in building automation
• Used with control panels requiring field-replaceable relays
• Can be used for signal routing in test and measurement rigs

What temperature range can it withstand during operation?

It is specified to operate between −25 °C and 55 °C, accommodating typical indoor industrial environments.

Which approvals ensure it meets recognised safety standards?

It carries UL and CSA approvals indicating conformity with established North American safety test programmes.

How is electrical contact performance quantified for load planning?

Contact resistance is specified at 50 mΩ, which helps assess voltage drop and heating for high‑current switching.

What are the electrical switching limits for AC and DC loads?

The switching ratings are 125V for both AC and DC, with a maximum switching current of 15A for load selection.

Approvals

VDE, UL, CSA, TUV