제조사부품번호

Omron PCB Relay, 12V Coil, 5A Switching Current, DPDT

RS 제품 번호:: 828-6763
제조사 부품 번호:: G2R-2-S 12VDC (S)
제조업체:: Omron

Omron PCB Relay, 12V Coil, 5A Switching Current, DPDT

Subtotal (1 unit)*

₩17,860.00

41 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩17,860.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 828-6763
제조사 부품 번호:: G2R-2-S 12VDC (S)
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Relay
	Coil Voltage	12V
	Contact Configuration	DPDT
	Mount Type	PCB
	Series	G2R
	Terminal Type	Plug-In
	Switching Current	5A
	Switching Power	600mW
	Switching AC Voltage	380V
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	125V dc
	Maximum Operating Temperature	70°C
	Coil Resistance	278Ω
	Coil Power	0.53W
	Height	35.5mm
	Width	13mm
	Standards/Approvals	UL, CSA
	Length	29mm
	Contact Material	Silver Tin Indium
	Contact Resistance	50mΩ

	모두 선택
	브랜드 Omron
	Product Type Relay
	Coil Voltage 12V
	Contact Configuration DPDT
	Mount Type PCB
	Series G2R
	Terminal Type Plug-In
	Switching Current 5A
	Switching Power 600mW
	Switching AC Voltage 380V
	Minimum Operating Temperature -40°C
	Switching DC Voltage 125V dc
	Maximum Operating Temperature 70°C
	Coil Resistance 278Ω
	Coil Power 0.53W
	Height 35.5mm
	Width 13mm
	Standards/Approvals UL, CSA
	Length 29mm
	Contact Material Silver Tin Indium
	Contact Resistance 50mΩ

G2R Datasheet

COO (Country of Origin):: MY

Omron G2R Series Relay, 12V Coil Voltage, DPDT Contact Configuration - G2R-2-S 12VDC (S)

This relay is an electromechanical switching device designed for control and signal applications in industrial environments. It operates from a 12V Coil and provides dual-pole changeover contacts for switching AC or DC loads. The unit is intended for PCB mounting and is suitable where compact, low-power control of circuits is required.

Features and Benefits:

• 0.53W Coil power reduces drive energy requirements
• 278Ω Coil resistance enables predictable drive characteristics
• DPDT contact arrangement allows independent dual-circuit switching
• AgSnIn contact material provides enhanced electrical endurance
• 5A switching current supports moderate load currents at up to 380V AC
• Plug-in terminals simplify replacement and installation

Applications

• Suitable for machine control panels requiring dual-circuit switching
• Ideal for signal routing in automation systems and PLC interfaces
• Used with test equipment for controlled AC and DC switching
• Can be used for small motor starter control and relay logic networks

What Coil voltage is required to operate it?

It requires a 12V Coil supply and is specified for that nominal Coil voltage.

What temperature range can it tolerate during operation?

The device is rated to operate down to -40°C and up to 70°C ambient.

How does it perform in terms of contact resistance?

Contact resistance is specified at 50mΩ, supporting low-voltage signal integrity.

Which mounting method is provided for circuit boards?

The unit is configured for direct PCB mounting with plug-in Terminal connectivity.

What approvals does it carry for industrial use?

It is certified to both UL and CSA standards for recognised safety compliance.

Approvals

UL508; CSA22.2; EN 61810-1; SEV; SEMKO