Phoenix Contact DIN Rail Power Relay, 120V ac Coil, 12A Switching Current, DPDT

Subtotal (1 unit)*

₩19,324.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 20 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩19,324.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
794-3724
제조사 부품 번호:
2903332
제조업체:
Phoenix Contact
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Phoenix Contact

Coil Voltage

120V ac

Product Type

Power Relay

Contact Configuration

DPDT

Mount Type

DIN Rail

Series

RIF-1-RPT-LV-120AC/2X21

Terminal Type

Plug-In

Switching Current

12A

Switching AC Voltage

250V ac

Switching DC Voltage

250V dc

Minimum Operating Temperature

-40°C

Switching Power

192W

Maximum Operating Temperature

50°C

Coil Resistance

8.8kΩ

Width

75mm

Standards/Approvals

DIN, IEC

Length

16mm

Coil Power

192W

Height

93mm

Contact Material

Silver Alloy

Phoenix Contact Power Relay, 8,800Ω Coil Resistance, 12A Switching Current - RIF-1-RPT-LV-120AC/2X21 - 2903332


Need a reliable switching solution for your PCB? Pick this 2-pole power relay from Phoenix Contact to turn your applications on and off. The unit comes fully assembled and includes a base, suppressor and retaining bracket, so you don't have to rummage around for additional parts.

Thanks to the DPDT contact configuration, you can control two circuits with a single actuator. This means a simpler setup with a space-saving footprint. Wires are terminated in a jiffy, thanks to the push-in connections. Plus, for versatility, these terminals handle wire sizes from 26 to 16AWG. Simply clip the relay onto a DIN rail for convenient, tool-free installation.

With its 250V AC and DC switching capability, you can use this device with different power sources to support high-voltage operations. A mechanical service life of 10,000,000 cycles assures you of consistent reliability. Use it for your industrial processes, medical equipment and in research and development facilities.

Features & Benefits


• Wide operating temperature range between -40°C and +50°C for use in challenging conditions

• IEC 62103 compliance indicates the unit is suitable for use in power installations

• IP20-rated component is touch-proof and protected against objects over 12mm for improved electrical safety

• Varistor surge protection to prevent damage and injuries

관련된 링크들