Microchip Battery Charger for MCP73871
- RS 제품 번호:
- 681-0875
- 제조사 부품 번호:
- MCP73871DM-VPCC
- 제조업체:
- Microchip
Subtotal (1 unit)*
₩58,844.00
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩58,844.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 681-0875
- 제조사 부품 번호:
- MCP73871DM-VPCC
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Power Management Function | Battery Charger | |
| Kit Classification | Evaluation Board | |
| Featured Device | MCP73871 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Power Management Function Battery Charger | ||
Kit Classification Evaluation Board | ||
Featured Device MCP73871 | ||
MCP73871 Demonstration Board
The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control.
Integrated System Load Sharing
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Battery Management, Microchip
관련된 링크들
- Microchip Battery Charger for MCP73871
- MikroElektronika MCP73871 Click Battery Charger for Lithium-ion, Lithium-Polymer Batteries
- Microchip OVP Dual-Cell Li-Ion Battery Charger Battery Charger for MCP73213
- Microchip Lithium Iron Phosphate Battery Charger Evaluation Board Battery Charger for MCP73x23
- Microchip LI-ION Battery Charger
- Brand-Rex USB Charger board Battery Charger for MCP73832
- Microchip MCP73837/8 AC/USB Dual Input Battery Charger Evaluation Board Evaluation Board for MCP7383XEV-DIBC for
- Microchip Dual Boost/SEPIC Evaluation Board Boost Controller for MCP19215 for Battery Charger, Bidirectional
