제조사부품번호

onsemi, Power Factor Controller IC 65 kHz 9-Pin, SOIC 35 V

RS 제품 번호:: 229-6360
제조사 부품 번호:: NCP1618BDR2G
제조업체:: onsemi

onsemi, Power Factor Controller IC 65 kHz 9-Pin, SOIC 35 V

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 229-6360
제조사 부품 번호:: NCP1618BDR2G
제조업체:: onsemi

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	onsemi
	Product Type	Power Factor Controller IC
	Start-up Supply Current	1mA
	Maximum Source Current	500mA
	Sub Type	Power Factor Controller
	Switching Frequency	65kHz
	Maximum Sink Current	800mA
	Supply Current	4mA
	Zero Power Detection	Yes
	Mount Type	Surface
	Package Type	SOIC
	Pin Count	9
	Minimum Supply Voltage	9.5V
	Maximum Supply Voltage	35V
	Minimum Operating Temperature	-40°C
	Width	4 mm
	Series	NCP1618B
	Standards/Approvals	No
	Height	1.75mm
	Length	5mm
	Maximum Operating Temperature	125°C
	Automotive Standard	No

	모두 선택
	브랜드 onsemi
	Product Type Power Factor Controller IC
	Start-up Supply Current 1mA
	Maximum Source Current 500mA
	Sub Type Power Factor Controller
	Switching Frequency 65kHz
	Maximum Sink Current 800mA
	Supply Current 4mA
	Zero Power Detection Yes
	Mount Type Surface
	Package Type SOIC
	Pin Count 9
	Minimum Supply Voltage 9.5V
	Maximum Supply Voltage 35V
	Minimum Operating Temperature -40°C
	Width 4 mm
	Series NCP1618B
	Standards/Approvals No
	Height 1.75mm
	Length 5mm
	Maximum Operating Temperature 125°C
	Automotive Standard No

Datasheet - NCP1618BDR2G

The ON Semiconductor NCP1618 series is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very-light-load conditions, the circuit can enter the soft-skip mode for minimized losses.

Optimized functioning over a large load range

Easing EMI filtering

Minimized external components

Multi-mode operation

onsemi, Power Factor Controller IC 65 kHz 9-Pin, SOIC 35 V

관련된 링크들