Sollatek Voltage Suppressor 415 V, Wall

모든 Power Conditioners 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩581,164.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩581,164.40
5 - 14₩570,993.60
15 - 29₩556,705.60
30 +₩542,793.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
707-9858
제조사 부품 번호:
93000200
제조업체:
Sollatek
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sollatek

Product Type

Voltage Suppressor

Input Voltage

415 V

Output Voltage

415 V

Mount Type

Wall

Maximum Operating Frequency

75Hz

Overall Length

200mm

Maximum Operating Temperature

55°C

Minimum Operating Frequency

45Hz

Minimum Operating Temperature

0°C

Overall Width

130mm

Series

DSP

Standards/Approvals

ISO9001:2008Voltage Protection Mode

Overall Depth

60 mm

Electrical Phase

3

Distribution Panel Spike & Surge Device


Mains spike/surge protection devices that are ideal for protecting all sensitive electronic equipment.

Features and Benefits:


Protection from voltage transients that can occur between phases (L-N, L-E, N-E)

Designed to be installed close to the incoming electrical supply panel

Wired in parallel with the supply

The unit should be connected via HRC fuses or a circuit breaker to protect the connecting cable

Two-led status indicator indicate level of protection available

Transient Voltage Suppressors (Modules,Industrial)


Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.

관련된 링크들