MG Chemicals 832TC-450ML Black Epoxy Epoxy Resin Adhesive 450 ml

모든 Potting Compounds 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩111,070.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 4 개 단위 배송 준비 완료
  • 추가로 2026년 1월 22일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 14₩111,070.40
15 - 39₩107,949.60
40 +₩105,054.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
918-4992
제조사 부품 번호:
832TC-450ML
제조업체:
MG Chemicals
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

MG Chemicals

Product Material

Epoxy

Package Type

Can

Package Size

450 ml

Special Properties

Thermal Conductivity

Cure Time

2 → 96 h

Colour

Black

Maximum Operating Temperature

+140°C

Minimum Operating Temperature

-30°C

Specific Gravity

1.6156

Physical Form

Liquid

Chemical Composition

Acetone, Ethyl Lactate, Hydrocloric Acid, Isohexanes, Isopropyl Alcohol, Mineral Spirits, Xylene

Setting Time

120min

Operating Temperature Range

-30 → +140 °C

Viscosity Measurement

38000 → 40000cP/s

COO (Country of Origin):
CA

MG Chemicals Epoxy Potting Compounds


The MG Chemicals two-part epoxy potting compound has been designed to protect your electronic components. The liquid electric grade 832 series epoxy protects your components against static discharges, fungus, thermal shocks, mechanical impact and vibrations.

Feature and Benefits


Impact resistant
Non-conductive
Low toxicity
Improves reliability and operational range
Non-porous, water and chemical resistant
Hard to remove
Available in different colours

Typical Applications


Aviation Industry
Communication Industry
Marine Industry
Car industry

Note

Refer to the datasheet for more details on how to apply and applications

Caution

Due to exothermic reaction, heat cure temperatures should be at least 25% below the maximum temperature tolerated by the most fragile PCB component. For larger potting blocks, reduce heat cure temperature by greater margins


Potting Compounds


The Potting Compounds are pourable two-part compounds for potting and encapsulating electronic circuits and components. They protect against moisture and corrosion and improve insulation resistance and mechanical strength. They may be cured at room temperature, or oven cured. Use silicone oil aerosol as a mould release agent. Full instructions supplied with each pack.
Suitable disposable polyethylene gloves stock no. 613-3156 are available.

관련된 링크들