Eaton RMQ-Titan 470 kΩ Potentiometer 1-Turns Screw, 229494 M22-R470K

모든 Potentiometers 열람하기

Subtotal (1 unit)*

₩176,062.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 3월 23일 부터 8 개 단위 배송
  • 추가로 2026년 4월 14일 부터 7 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩176,062.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
620-6068
제조사 부품 번호:
229494 M22-R470K
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Product Type

Potentiometer

Maximum Resistance

470kΩ

Shaft Diameter

29.7mm

Number of Turns

1

Power Rating

0.5W

Mount Type

Screw

Termination Style

Screw

Shaft Length

29.2mm

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

70°C

Standards/Approvals

RoHS

Series

RMQ-Titan

Tolerance ±

10%

Mounting Hole Diameter

22.5 mm

Eaton RMQ Titan


Eaton Potentiometers - M22 Series


Eaton’s M22 range of rotary potentiometers enable a user to regulate and change the current that flows through a circuit, these rotary potentiometers can be easily controlled by turning the adjustable spindle or knob. These potentiometers are panel mount with screw terminals for easy mounting inside control panels and other electronics.

Features & Benefits


• Screw terminals meaning this device can be installed with just a screwdriver

• Panel mounting

• Precision twist action on the rotary knob to set the value

• Features an IP66 rating, this means that the potentiometer is protected against dust that may cause harm to it, this rating also means that the potentiometer is protected against low-pressure water jets (all directions)

• 1 - 470 kOhms maximum resistance

• ±10% tolerance (linear)

• Forms part of the M22 series

What is a Potentiometer?


A potentiometer is a variable resistor that increases or decreases the resistance in an application. Usually available as either digital or analogue, there are many different types of potentiometer but the two main types are rotary and linear.

• Linear - comes in a rectangle strip shape and can be pulled up or down for the required resistance, used a lot within sound systems for mic output or volume control.

• Rotary - the shaft is housed by a knob, you would find these on dimmer switches or speakers, and turning (usually to the right) will increase the resistance amplifying the output, whether that is light, sound or voltage.

How do Potentiometers work?


Potentiometers have two terminals that are fixed to a resistive element (the track). The resistive element is typically wire wound or made from carbon, cermet or conductive plastic. The third terminal is connected to the wiper, which is a sliding contact. As the wiper moves along the track, the resistance changes and the current flowing through the circuit changes.

Note

Eaton formerly known as Moeller

관련된 링크들