Festo G 1/4 Pneumatic Regulator - 0.3bar to 7bar, 1/4in, 14bar max. input, 529417

모든 Pneumatic Regulators 열람하기

Subtotal (1 unit)*

₩99,132.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 1월 26일 부터 186 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩99,132.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
121-5659
제조사 부품 번호:
MS4-LR-1/4-D6-AS
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Port Connection

G 1/4

Maximum Outlet Pressure

7bar

Minimum Outlet Pressure

0.3bar

Maximum Input Pressure

14bar

Manufacturer Series

MS-LR

Pressure Gauge Port Size

G 1/4

Port Connection Thread Size

1/4in

Pressure Gauge Port Thread Size

1/4in

Maximum Flow Rate

7500L/min

Typical Flow Rate

1800L/min

Port Connection Thread Standard

G

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

+60°C

Overall Height

117.5mm

Overall Length

40mm

Model Number p

529417

Overall Dimensions

40 x 57 x 117.5mm

Pressure Gauge Port Thread Standard

G

Overall Width

57mm

COO (Country of Origin):
HU

Festo Pneumatic Regulator, G1/4 Port Connection, 7 Bar Maximum Input Pressure - MS4-LR-1/4-D6-AS


Are you in need of a way to maintain the output air pressure of your pneumatic compressor? This Festo pneumatic regulator automatically shuts off the airflow when the set pressure is reached to keep it at the correct level for your setup. It has a G1/4 threaded end that tightens in place so the connected pipe remains secure, even in vibrating systems. With an operating temperature range between -10°C and +60°C, this regulator is suitable for use in harsh industrial environments.

• Up to 7 bar input pressure for receiving air from low-pressure systems
• Typical flow rate of 1800L/min (litres per minute), ensuring your equipment has maximum flow capability
• Suitable for front panel mounting or in-line installation for versatile setup options

Applications


• Heating furnaces
• Gas grills
• Medical respirators
• Dental equipment

What's this pneumatic regulator made of?


This pneumatic regulator has a die-cast aluminium housing material to prevent corrosion wear. Its seals are made from NBR (nitrile rubber) to insulate the regulator against leaks. The control panel is made from PA and POM (polyoxymethylene), which have high-tensile strength and remain rigid under pressure.


Regulators and Filter Regulators

관련된 링크들