SMC 1/2 in Pneumatic Air Lubricator 1 MPa, AL-D Series

모든 Pneumatic Lubricators 열람하기

Subtotal (1 unit)*

₩106,240.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 8월 24일 부터 16 개 단위 배송
  • 추가로 2026년 8월 31일 부터 8 개 단위 배송
  • 추가로 2026년 9월 10일 부터 8 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩106,240.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
255-3280
제조사 부품 번호:
AL40-F04-D
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Port Size

1/2 in

Product Type

Pneumatic Air Lubricator

Connection Thread Standard

G

Series

AL-D

Oil Capacity

135cm³

Maximum Operating Pressure

1 MPa

Minimum Operating Temperature

-5°C

Maximum Operating Temperature

60°C

Standards/Approvals

No

Overall Height

176mm

Overall Width

70mm

Bowl Material

Polycarbonate

COO (Country of Origin):
CN

SMC AL-D Series Pneumatic Air Lubricator, 135cm³ Oil Capacity, 1/2 inch Port Size - AL40-F04-D


This pneumatic air lubricator supplies a controlled oil mist to compressed-air systems to reduce wear and maintain moving parts. Designed for industrial environments, it connects via G-thread ports and operates across a broad temperature range without freezing, supporting continuous lubrication where air-driven equipment requires metered oil delivery.

Features and Benefits:


• 135cm³ oil reservoir provides extended service intervals
• Operates up to 1MPa to suit high-pressure networks
• Minimum operating pressure 0.05MPa enables low-pressure use
• Polycarbonate bowl allows visual oil level checks
• Maximum medium temperature 60°C for warm environments
• Minimum medium temperature -5°C for non-freezing conditions

Applications


• Suitable for pneumatic tools and actuators in factories
• Ideal for air-driven conveyors and indexing mechanisms
• Used with compressed-air distribution panels and manifolds
• Can be used for maintenance circuits in assembly lines
• Used for lubrication of air motors and cylinders

What flow performance can be expected at typical inlet pressures?


At an inlet pressure of 1.0MPa the unit achieves a maximum flow of 8000 l/min, with a minimum dripping flow of 50 l/min for reliable oil delivery.

Which lubricant grade should be used with this device?


Use Class 1 turbine oil ISO VG32 to match the recommended viscosity for correct atomisation and consistent lubrication.

What mechanical strength margins exist beyond normal operating pressure?


The device has a proof pressure of 1.5MPa, providing a safety margin above the maximum operating pressure.

How compact is the product for tight installations?


The overall width measures 70mm, allowing installation where space along the air line is restricted.

관련된 링크들