제조사부품번호

SMC EX510 series Pneumatic Logic Controller

RS 제품 번호:: 426-828
제조사 부품 번호:: EX510-DYP3
제조업체:: SMC

SMC EX510 series Pneumatic Logic Controller

모든 Pneumatic Logic Controllers 열람하기

Subtotal (1 unit)*

₩375,141.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩375,141.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 426-828
제조사 부품 번호:: EX510-DYP3
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Pneumatic Logic Controller
	Series	EX510
	Number of Inputs	3
	Voltage	24V
	Display Type	LED Indicator
	Hazardous Area Certification	No
	Number of Outputs	4
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	-10°C
	Height	31mm
	Standards/Approvals	UL, CSA, CE/UKCA
	Width	70mm
	Depth	19.6mm
	Connection Type	M12
	Suitable Medias	Air
	Output Type	PNP

	모두 선택
	브랜드 SMC
	Product Type Pneumatic Logic Controller
	Series EX510
	Number of Inputs 3
	Voltage 24V
	Display Type LED Indicator
	Hazardous Area Certification No
	Number of Outputs 4
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature -10°C
	Height 31mm
	Standards/Approvals UL, CSA, CE/UKCA
	Width 70mm
	Depth 19.6mm
	Connection Type M12
	Suitable Medias Air
	Output Type PNP

Datasheet - EX510-DYP3

COO (Country of Origin):: JP

The SMC EX510 Output Unit series makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.

Output units with a maximum of 16 output points

Cage clamp type terminal base which does not need to be screwed

Compliant to either NPN or PNP

SMC EX510 series Pneumatic Logic Controller

관련된 링크들