SMC Pneumatic Guided Cylinder - 25mm Bore, MGP Series, 100 mm Double Acting Acting

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩613,780.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 18 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩613,780.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
758-0733
제조사 부품 번호:
MGPM25TF-100Z
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Pneumatic Guided Cylinder

Bore Diameter

25mm

Series

MGP

Action Type

Double Acting

Mount Type

Bottom, Top Mount, Side

Maximum Operating Pressure

1 Mpa

Cushioning Type

Rubber

Minimum Operating Temperature

-10°C

Maximum Piston Speed

500mm/s

Piston Rod Thread Standard

G

Guide Type

Slide Bearing

Rod Type

Single

Maximum Operating Temperature

60°C

Weight

1.9kg

Standards/Approvals

No

Height

58mm

Width

26mm

Length

185mm

Stroke Length

100mm

SMC MGP Series Compact Guide Cylinder, 25mm Bore size, 100mm Stroke Length - MGPM25TF-100Z


This Compact guide cylinder provides guided linear motion for automated systems, combining guided stability with pneumatic actuation for controlled double-acting operation. It is suitable for machinery where precise parallel guiding and Compact installation are required, and functions within typical industrial temperature and pressure limits while supporting a single-rod configuration and slide-bearing guidance.

Features and Benefits:


• 100mm stroke delivers repeatable linear travel for positioning tasks
• 1 MPa maximum operating pressure enables robust pneumatic force transmission
• 500 mm/s maximum piston speed supports high-cycle applications
• Rubber bumpers on both ends reduce impact and minimise wear
• Bottom, TOP and side mount options allow flexible installation
• Slide bearing guide reduces lateral play for improved alignment

Applications


• Suitable for pick-and-place stations in assembly lines
• Ideal for press-feed alignment in electrical-panel production
• Used with linear fixtures in electronics test rigs
• Can be used for tool positioning in mechanical automation cells
• Used for component transfer on conveyor changeover mechanisms

What are the permissible ambient temperatures for operation?


The unit operates between -10°C and +60°C, suitable for most indoor factory environments.

How does the rod Interface accommodate attachments?


A single rod with a G standard thread allows direct fitting of end-effectors and mechanical couplings.

Which physical attributes aid Compact installations?


The Compact form factor includes a 58mm height and 26mm width to minimise footprint in tight assemblies.

How much does the actuator weigh for handling and mounting considerations?


The device weighs 2.191 kg, which informs fixture design and mounting-hardware selection.

Note

May be used with reed switch 161-782, available in most markets.

관련된 링크들