SMC Pneumatic Guided Cylinder - 16mm Bore, MGPL Series, 75 mm Double Acting Acting
- RS 제품 번호:
- 237-3530
- 제조사 부품 번호:
- MGPL16-75Z
- 제조업체:
- SMC
Subtotal (1 unit)*
₩673,146.00
일시적 품절
- 2026년 11월 26일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩673,146.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 237-3530
- 제조사 부품 번호:
- MGPL16-75Z
- 제조업체:
- SMC
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SMC | |
| Product Type | Pneumatic Guided Cylinder | |
| Bore Diameter | 16mm | |
| Series | MGPL | |
| Action Type | Double Acting | |
| Maximum Operating Pressure | 1 Mpa | |
| Body Material | Aluminium Alloy | |
| Cushioning Type | Rubber Bumper | |
| Minimum Operating Temperature | -10°C | |
| Maximum Piston Speed | 500mm/s | |
| Guide Type | Ball Bushing | |
| Piston Rod Thread Size | M5 x 0.8 | |
| Rod Type | Double Acting | |
| Maximum Operating Temperature | 60°C | |
| Weight | 670g | |
| Standards/Approvals | No | |
| Stroke Length | 75mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 SMC | ||
Product Type Pneumatic Guided Cylinder | ||
Bore Diameter 16mm | ||
Series MGPL | ||
Action Type Double Acting | ||
Maximum Operating Pressure 1 Mpa | ||
Body Material Aluminium Alloy | ||
Cushioning Type Rubber Bumper | ||
Minimum Operating Temperature -10°C | ||
Maximum Piston Speed 500mm/s | ||
Guide Type Ball Bushing | ||
Piston Rod Thread Size M5 x 0.8 | ||
Rod Type Double Acting | ||
Maximum Operating Temperature 60°C | ||
Weight 670g | ||
Standards/Approvals No | ||
Stroke Length 75mm | ||
- COO (Country of Origin):
- CN
SMC MGPL Series Compact Guide Cylinder, 16mm Bore size, 75mm Stroke Length - MGPL16-75Z
This Compact guide cylinder provides guided linear motion for automation and mechanical systems, combining a guided rod arrangement with a pneumatic piston to control precise lateral loads in confined assemblies. It is intended for double-acting actuation in equipment where a small footprint and guided stability are required, operating across a moderate temperature range and suited to routine industrial duty.
Features and Benefits:
• Aluminium body reduces mass and eases installation
• Ball bushing guide increases lateral load capacity
• Rubber bumpers on both ends soften end-of-stroke impacts
• 1MPa maximum pressure allows robust pneumatic supply
• 500mm/s TOP piston speed supports Rapid cycling
• M5x0.8 piston rod thread simplifies accessory mounting
• Ball bushing guide increases lateral load capacity
• Rubber bumpers on both ends soften end-of-stroke impacts
• 1MPa maximum pressure allows robust pneumatic supply
• 500mm/s TOP piston speed supports Rapid cycling
• M5x0.8 piston rod thread simplifies accessory mounting
Applications
• Suitable for pick-and-place stations requiring guided motion
• Ideal for feed and aligning mechanisms in assembly lines
• Used for Compact actuator tasks in electronics production
• Can be used for light-duty clamping in mechanical fixtures
• Used with pneumatic manifolds in automated test rigs
• Ideal for feed and aligning mechanisms in assembly lines
• Used for Compact actuator tasks in electronics production
• Can be used for light-duty clamping in mechanical fixtures
• Used with pneumatic manifolds in automated test rigs
What stroke length does it provide for integration planning?
The unit offers a 75mm piston travel to define working range and mounting clearances.
What environmental temperature limits must be observed during operation?
The device functions between -10°C and 60°C, so ambient and media temperatures must remain within this span.
How much does the actuator weigh for payload and support calculations?
The actuator has a mass of 0.67kg to include when assessing support structures and moving inertia.
What form of cushioning is incorporated to reduce impact forces?
Each end uses rubber bumpers to attenuate shock at stroke termini and reduce noise.
관련된 링크들
- SMC Pneumatic Guided Cylinder - MGPL50TF-75Z 50mm Bore, MGPL Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - MGPL40TF-75Z 40mm Bore, MGPL Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - MGPL32TF-75Z 32mm Bore, MGPL Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - MGPL12-75Z 12mm Bore, MGP Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - MGPL32TF-75AZ 32mm Bore, MGPL Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - MGPL16-75AZ 16mm Bore, MGPM Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - MGPL20TF-75Z 20mm Bore, MGP Series, 75 mm Double Acting Acting
- SMC Guided Air Cylinders - MGPL63TF 75Z 63mm Bore, MGP Series, 75 mm Double Acting Acting
