SMC Pneumatic Compact Cylinder - MGPL20TF-30Z 20mm Bore, MGP Series, 30 mm Double Acting Acting

Subtotal (1 unit)*

₩628,900.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩628,900.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
389-285
제조사 부품 번호:
MGPL20TF-30Z
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Pneumatic Compact Cylinder

Bore Diameter

20mm

Series

MGP

Action Type

Double Acting

Mount Type

Side, Bottom, Top Mount

Maximum Operating Pressure

1 Mpa

Body Material

Aluminium Alloy

Cushioning Type

Rubber Cushioning at Both Ends

Maximum Piston Speed

500mm/s

Minimum Operating Temperature

-10°C

Rod Type

Double Acting

Piston Rod Thread Standard

G

Guide Type

Ball Bushing

Maximum Operating Temperature

60°C

Weight

660g

Standards/Approvals

RoHS

Stroke Length

30mm

Model Number

MGPL20TF-30Z

COO (Country of Origin):
CN

SMC MGP Series Compact Guide Cylinder, 20mm Bore size, 30mm Stroke Length - MGPL20TF-30Z


This Compact guide cylinder provides guided linear motion for automation and mechanical systems, combining a guided slide with a double-acting piston to control lateral loads while delivering short, controlled strokes. It is designed for applications requiring precise rod guidance and constrained movement in confined assemblies, operating across typical industrial temperature ranges.

Features and Benefits:


• 20mm bore for concentrated force in Compact assemblies
• 30mm stroke for short travel positioning tasks
• Rubber bumpers on both ends for reduced impact and noise
• Ball bushing guide for improved lateral load support
• Aluminium alloy body for reduced mass and corrosion resistance
• 1MPa maximum pressure to support medium-pressure systems

Applications


• Suitable for pick-and-place units in automated lines
• Ideal for tooling fixtures requiring guided motion control
• Used with electrical panel assembly machines for short strokes
• Can be used for end-of-arm tooling that needs lateral stability
• Used for Compact presses where limited travel is required

What mounting options are available for integrating into assemblies?


It supports side, bottom and TOP mounting to simplify integration into diverse machine layouts and save space during installation.

What temperature conditions can it tolerate in continuous operation?


It is rated for continuous use between -10°C and 60°C, allowing operation in typical workshop and indoor factory environments.

How fast can the piston operate for cycle planning?


The piston can run up to 500mm/s, enabling moderate-speed cycling for short-stroke processes.

What is the actuator’s mass for load and balance calculations?


The unit has a mass of 0.66kg for consideration in dynamic and support structure design.

Does the product meet material or environmental restrictions important to procurement?


It is RoHS compliant, indicating the absence of specified restricted substances for regulatory adherence.

관련된 링크들