제조사부품번호

SMC AS Series Speed Controller Speed Controller, 1/2 in G G 1/2 in 12 mm

RS 제품 번호:: 815-5338
제조사 부품 번호:: AS4201FS-04-12S
제조업체:: SMC

SMC AS Series Speed Controller Speed Controller, 1/2 in G G 1/2 in 12 mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Pneumatic Function Fittings 열람하기

Subtotal (1 unit)*

₩56,140.50

재고있음

12 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩56,140.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 815-5338
제조사 부품 번호:: AS4201FS-04-12S
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Inlet Connection Type	1/2 in G
	Product Type	Speed Controller
	Sub Type	Speed Controller
	Inlet Connection Size	1/2 in
	Outlet Connection Size	12 mm
	Series	AS
	Inlet Thread Standard	G
	Maximum Operating Pressure	1 Mpa
	Minimum Operating Temperature	-5°C
	Material	Stainless Steel, POM, Brass, Polyphenylene Sulfide, Steel Wire, Halogenated Nitrile Rubber (HNBR), Polybutylene Terephthalate, Nitrile Rubber (NBR)
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Minimum Operating Pressure	0.1MPa
	Hazardous Area Certification	No
	Proof Pressure	1.5MPa

	모두 선택
	브랜드 SMC
	Inlet Connection Type 1/2 in G
	Product Type Speed Controller
	Sub Type Speed Controller
	Inlet Connection Size 1/2 in
	Outlet Connection Size 12 mm
	Series AS
	Inlet Thread Standard G
	Maximum Operating Pressure 1 Mpa
	Minimum Operating Temperature -5°C
	Material Stainless Steel, POM, Brass, Polyphenylene Sulfide, Steel Wire, Halogenated Nitrile Rubber (HNBR), Polybutylene Terephthalate, Nitrile Rubber (NBR)
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Minimum Operating Pressure 0.1MPa
	Hazardous Area Certification No
	Proof Pressure 1.5MPa

로그인하여 CAD 모델 다운로드

COO (Country of Origin):: IN

SMC Series AS Speed Controller, 12mm Outlet size, 1/2 inches Inlet Connection size - AS4201FS-04-12S

This speed controller regulates pneumatic flow to control actuator motion and cycle timing in industrial systems. It is designed for use where robust materials and consistent performance across a range of pressures and temperatures are required, supporting integration with standard G‑threaded pneumatic fittings for streamlined installation.

Features & Benefits

• Maximum operating pressure 1 MPa for demanding pneumatic circuits
• Proof pressure 1.5 MPa enhances overpressure tolerance
• Operating temperature range -5°C to 60°C for varied environments
• Inlet connection 1/2 in G for common plant compatibility
• Outlet connection 12mm to match metric tubing systems
• Sealing with HNBR and NBR for resilient fluid resistance

Applications

• Suitable for controlling cylinder retraction speeds in automation lines
• Ideal for flow adjustment on pneumatic conveyors and feeders
• Used with pneumatic valves to fine‑tune motion profiles in assembly cells
• Can be used for speed regulation on pick‑and‑place equipment
• Suitable for maintenance spares in mechanical workshop rigs

What materials contact the medium and how does that help longevity?

Wetted components combine stainless steel, brass and engineered polymers to balance corrosion resistance with wear performance in compressed Air systems.

Which thread standard does the unit use for inlet plumbing?

The inlet employs a G‑threaded 1/2 in connection to match common British and international pneumatic fittings.

How does proof pressure affect safety margins in system design?

A 1.5 MPa proof rating provides a safety buffer above normal working pressure, allowing designers to specify suitable relief devices and test conditions.

Are there approvals indicating restricted substance control?

The product meets RoHS requirements, reducing the presence of regulated hazardous substances in its construction.