SMC ASP Series Speed Controller Speed Controller, 3/8 in R R 3/8 in One-touch Fitting 8 mm

RS 제품 번호:: 210-676
제조사 부품 번호:: ASP530F-F03-08S
제조업체:: SMC

SMC ASP Series Speed Controller Speed Controller, 3/8 in R R 3/8 in One-touch Fitting 8 mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Pneumatic Function Fittings 열람하기

Subtotal (1 unit)*

₩105,046.50

재고있음

13 개 단위 배송 준비 완료
추가로 2026년 7월 06일 부터 8 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩105,046.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 210-676
제조사 부품 번호:: ASP530F-F03-08S
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Outlet Connection Type	One-touch Fitting
	Inlet Connection Type	3/8 in R
	Product Type	Speed Controller
	Sub Type	Speed Controller
	Inlet Connection Size	3/8 in
	Outlet Connection Size	8 mm
	Series	ASP
	Inlet Thread Standard	R
	Maximum Operating Pressure	1 Mpa
	Material	Polybutylene Terephthalate, Brass, Zinc Alloy, Nitrile Butadiene Rubber, Polyoxymethylene, Stainless Steel, Polypropylene
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	UL Standard V-0
	Minimum Operating Pressure	0.1MPa
	Hazardous Area Certification	No
	Proof Pressure	1.5MPa

	모두 선택
	브랜드 SMC
	Outlet Connection Type One-touch Fitting
	Inlet Connection Type 3/8 in R
	Product Type Speed Controller
	Sub Type Speed Controller
	Inlet Connection Size 3/8 in
	Outlet Connection Size 8 mm
	Series ASP
	Inlet Thread Standard R
	Maximum Operating Pressure 1 Mpa
	Material Polybutylene Terephthalate, Brass, Zinc Alloy, Nitrile Butadiene Rubber, Polyoxymethylene, Stainless Steel, Polypropylene
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Standards/Approvals UL Standard V-0
	Minimum Operating Pressure 0.1MPa
	Hazardous Area Certification No
	Proof Pressure 1.5MPa

제외

COO (Country of Origin):: FR

SMC ASP Series Speed Controller, 1 Mpa Maximum Operating Pressure, 60°C Maximum Operating Temperature - ASP530F-F03-08S

This speed controller is a Compact pneumatic device designed to regulate airflow in industrial automation systems. It is intended for use where controlled cylinder or actuator motion is required and provides bidirectional flow control via a one-touch outlet connection. Constructed using a mix of engineered plastics and metals, the unit suits general factory and equipment panel installations without hazardous-area certification.

Features & Benefits

• Maximum operating pressure 1MPa provides stable flow control under load
• Proof pressure 1.5MPa increases safety margin during pressure surges
• Operating temperature range -5°C to 60°C supports varied workshop conditions
• One-touch 8mm outlet enables quick hose connection and removal
• 3/8in R inlet thread allows straightforward piping integration
• Components include brass and PBT for corrosion resistance and durability

Applications

• Suitable for regulating pneumatic cylinder speed in assembly lines
• Ideal for motion control in pick-and-place equipment
• Used for flow adjustment on air-driven testing rigs
• Can be used for speed tuning in valve actuator set-ups

What materials contact the pneumatic medium inside the valve?

Internal wetted parts comprise brass, nitrile butadiene rubber and polyoxymethylene to balance wear resistance and sealing performance.

How does the inlet thread standard affect installation?

The inlet uses a 3/8in R threaded connection, compatible with standard R-thread fittings for simple integration into existing pipework.

Is the unit suitable where higher-than-normal pressures occur briefly?

It tolerates short-term excursions up to the 1.5MPa proof pressure, providing margin above the 1MPa normal operating limit.

What flammability characteristic does the housing meet?

The polymer components conform to UL V-0 requirements for reduced flammability risk in electrical and control enclosures.

Note

Use caution with soft nylon or polyurethane at maximum pressure.