제조사부품번호

SMC AS Series Speed Controller Speed Controller R 1/4 in One-touch Fitting 10 mm

RS 제품 번호:: 209-985
제조사 부품 번호:: AS2201FG-02-10S
제조업체:: SMC

SMC AS Series Speed Controller Speed Controller R 1/4 in One-touch Fitting 10 mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Pneumatic Function Fittings 열람하기

Subtotal (1 unit)*

₩49,335.00

재고있음

추가로 2026년 6월 29일 부터 9 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩49,335.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 209-985
제조사 부품 번호:: AS2201FG-02-10S
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Outlet Connection Type	One-touch Fitting
	Product Type	Speed Controller
	Sub Type	Speed Controller
	Inlet Connection Size	1/4 in
	Outlet Connection Size	10 mm
	Series	AS
	Inlet Thread Standard	R
	Maximum Operating Pressure	1 Mpa
	Minimum Operating Temperature	-5°C
	Material	Brass, Stainless Steel, Nitrile Rubber (NBR), POM, Polybutylene Terephthalate
	Maximum Operating Temperature	60°C
	Standards/Approvals	UL Standard V-0
	Hazardous Area Certification	No
	Minimum Operating Pressure	0.1MPa
	Proof Pressure	1.5MPa

	모두 선택
	브랜드 SMC
	Outlet Connection Type One-touch Fitting
	Product Type Speed Controller
	Sub Type Speed Controller
	Inlet Connection Size 1/4 in
	Outlet Connection Size 10 mm
	Series AS
	Inlet Thread Standard R
	Maximum Operating Pressure 1 Mpa
	Minimum Operating Temperature -5°C
	Material Brass, Stainless Steel, Nitrile Rubber (NBR), POM, Polybutylene Terephthalate
	Maximum Operating Temperature 60°C
	Standards/Approvals UL Standard V-0
	Hazardous Area Certification No
	Minimum Operating Pressure 0.1MPa
	Proof Pressure 1.5MPa

로그인하여 CAD 모델 다운로드

제외

COO (Country of Origin):: FR

SMC Series AS Speed Controller, 1/4 inches Inlet Connection size, 10mm Outlet Connection size - AS2201FG-02-10S

This speed controller regulates pneumatic flow to control actuator motion in industrial automation and machine systems. It is constructed from a combination of metals and engineering plastics to suit applications where controlled deceleration or feed-rate adjustment is required. The unit connects into pneumatic lines via a 1/4 in inlet and a simple 10mm one-touch outlet to facilitate quick installation in equipment and production assemblies.

Features & Benefits

• Maximum operating pressure 1 MPa delivers consistent flow control under load
• Proof pressure 1.5 MPa provides margin for system pressure spikes
• Operating temperature range -5 to 60 °C maintains function across typical plant climates
• Construction in brass and stainless steel resists mechanical wear in service
• One-touch 10mm outlet allows Rapid tube connection without additional fittings

Applications

• Suitable for controlling cylinder speed on assembly lines
• Ideal for integrating into pneumatic tooling and fixtures
• Used with conveyor actuators to regulate motion smoothness
• Can be used for flow adjustment on test benches and rigs

What sealing materials are used where pressure retention matters?

Nitrile rubber Seals are employed to provide pressure retention and oil resistance at typical plant temperatures.

Which non-metal components contribute to dimensional stability?

POM and polybutylene terephthalate parts are used for internal components that require low friction and stable tolerances.

Is the unit suitable for installations requiring recognised flammability ratings?

The housing materials meet UL V-0 standard for flame retardancy in applicable components.

How does the inlet Interface affect integration with existing tubing?

The 1/4 in inlet is compatible with common quarter-inch pneumatic fittings, allowing straightforward replacement or retrofit.