INA RASEY16-XL Plummer Block House -, 16 mm ID

This plummer Block housing is a bearing housing designed to support rotating shafts in industrial assemblies. It provides a secure mounting point for bearings within machinery used across automation and mechanical systems, combining a robust cast iron body with a Compact footprint suitable for constrained installations.

• Cast iron construction offers Durable load support and vibration damping
• 16mm inside diameter enables use with standard 16mm shaft bearings
• 30.2mm centre height ensures consistent shaft alignment in assemblies
• 125mm overall length gives stable axial positioning for housed bearings
• 95mm mount hole centre-to-centre spacing simplifies frame integration
• 19mm mount holes accommodate substantial fasteners for secure fixing

• Suitable for conveyor drive shaft support in automated lines
• Ideal for mounting bearing assemblies in motor drives
• Used with gearbox output shafts in small industrial equipment
• Can be used for idler shaft support in material handling systems

The housing is manufactured from cast iron which provides good rigidity and wear resistance, making it suitable for moderate industrial environments where mechanical strength is prioritised over corrosion resistance.

The housing includes two mounting holes with a centre-to-centre spacing of 95mm and 19mm diameter that permit the use of substantial fasteners to secure the unit to structural frames.

The internal bore measures 16mm, so bearings with a 16mm shaft bore are compatible, ensuring direct fitment of standard 16mm shaft-bearing combinations.

The vertical distance from mounting face to shaft centre is 30.2mm, which must be matched to neighbouring components to maintain correct alignment.