제조사부품번호

SKF SY 509 M Plummer Block House -, 85 mm ID

RS 제품 번호:: 464-651
제조사 부품 번호:: SY 509 M
제조업체:: SKF

SKF SY 509 M Plummer Block House -, 85 mm ID

본 제품군 열람하기

Subtotal (1 unit)*

₩98,080.00

재고있음

추가로 2026년 10월 05일 부터 6 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩98,080.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 464-651
제조사 부품 번호:: SY 509 M
제조업체:: SKF

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SKF
	Product Type	Plummer Block House
	Inside Diameter	85mm
	Material	Cast Iron
	Centre Height	54mm
	Mount Hole Size	12 mm
	Length	187mm
	Depth	48mm
	For Use With	Insert Bearings, ISO Standards, Cast Iron
	Number of Bolts	2
	Series	SY
	Standards/Approvals	RoHS
	Height	107mm

	모두 선택
	브랜드 SKF
	Product Type Plummer Block House
	Inside Diameter 85mm
	Material Cast Iron
	Centre Height 54mm
	Mount Hole Size 12 mm
	Length 187mm
	Depth 48mm
	For Use With Insert Bearings, ISO Standards, Cast Iron
	Number of Bolts 2
	Series SY
	Standards/Approvals RoHS
	Height 107mm

Datasheet - SY 509 M

SKF Series SY Plummer Block House, 54mm Centre Height, 85mm Inside Diameter - SY 509 M

This plummer Block housing is a cast iron bearing housing designed to accommodate insert bearings with an 85 mm internal diameter. It provides a rigid support point for rotating shafts and is suited to installations that require a set centre height and standardised mounting interfaces. The component is manufactured to comply with restricted substance guidelines and integrates with ISO-format bearing inserts.

Features and Benefits:

• Cast iron construction delivers stable load support
• 54 mm centre height ensures consistent shaft alignment
• Two-bolt arrangement simplifies secure attachment
• 12 mm mount holes enable use of common fasteners
• 48 mm unit depth reduces axial footprint
• Compatible with ISO bearing inserts for interchangeability

Applications

• Used with insert bearings in conveyor drives
• Suitable for light industrial shaft support assemblies
• Ideal for replacement of standardised bearing housings
• Can be used for machinery with fixed centre heights
• Used for installations requiring RoHS-compliant components

What material is used for the housing body?

It is manufactured from cast iron to provide structural rigidity and wear resistance.

What bore size does the housing accept?

The internal diameter is 85 mm to suit matching insert bearings.

How many bolts secure the housing and what hole size is required?

Two bolts are used and the mounting holes accept 12 mm fasteners.

What is the vertical distance from mounting face to shaft centre?

The centre height measures 54 mm which sets the shaft elevation.