Knipex 1-Piece Plier, 121mm Overall, 18mm Jaw
- RS 제품 번호:
- 267-7049
- Distrelec 제품 번호:
- 302-23-013
- 제조사 부품 번호:
- 36 22 125
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩146,580.00
재고있음
- 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩146,580.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-7049
- Distrelec 제품 번호:
- 302-23-013
- 제조사 부품 번호:
- 36 22 125
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Plier | |
| Number of Pieces | 1 | |
| VDE/1000V Approved | No | |
| Overall Length | 121mm | |
| Cutting Capacity | 1.2 mm Soft Wire | |
| Material | Steel | |
| ESD Safe | No | |
| Handle Type | Comfort Grip | |
| Jaw Length | 18mm | |
| Finish | Mirror Polished | |
| Non-Sparking | No | |
| Standards/Approvals | REACH | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Plier | ||
Number of Pieces 1 | ||
VDE/1000V Approved No | ||
Overall Length 121mm | ||
Cutting Capacity 1.2 mm Soft Wire | ||
Material Steel | ||
ESD Safe No | ||
Handle Type Comfort Grip | ||
Jaw Length 18mm | ||
Finish Mirror Polished | ||
Non-Sparking No | ||
Standards/Approvals REACH | ||
비준수
- COO (Country of Origin):
- DE
KNIPEX 36 22 125 Electronics Mounting Pliers with multi-component handles 125 mm
36 22 125 Electronics Mounting Pliers for bending and cutting off wire ends on components. Robust, load-optimized construction with through-pinned and backlash-free precision joint. Side angles carefully rounded: no sharp, material-damaging edges. High, slim sleeves for fine and comfortable gripping between thumb and index finger. Uniform bending behavior for a more direct sense of work. Smooth ground gripping surfaces, edges carefully deburred. Low-friction double spring for smooth and even opening. The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools. to bend and cut wire at 1.6 mm length below the board. - Cutting capacities soft wire (diameter): Ø 1.2mm- Jaw thickness (joint) (T1): 7.0mm- Tips thickness (W4): 4.0mm- Head width (W3): 11.0mm- Handle width: 7.5mm- Jaw length (L3): 18.0mm- Application: cut at 1.6 mm and bend wire
Features and Benefits
For Bending And Cutting Off Wire Ends On Components
Robust, Load-Optimized Construction With Through-Pinned And Backlash-Free Precision Joint
Side Angles Carefully Rounded: No Sharp, Material-Damaging Edges
To Bend And Cut Wire At 1.6 Mm Length Below The Board
Robust, Load-Optimized Construction With Through-Pinned And Backlash-Free Precision Joint
Side Angles Carefully Rounded: No Sharp, Material-Damaging Edges
To Bend And Cut Wire At 1.6 Mm Length Below The Board
Technical attributes
High, Slim Sleeves For Fine And Comfortable Gripping Between Thumb And Index Finger
Uniform Bending Behavior For A More Direct Sense Of Work
Smooth Ground Gripping Surfaces, Edges Carefully Deburred
Low-Friction Double Spring For Smooth And Even Opening
The Mirror Polish In Combination With A Fine Oil Film Provides Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
Uniform Bending Behavior For A More Direct Sense Of Work
Smooth Ground Gripping Surfaces, Edges Carefully Deburred
Low-Friction Double Spring For Smooth And Even Opening
The Mirror Polish In Combination With A Fine Oil Film Provides Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
관련된 링크들
- Knipex 1-Piece Plier, 12mm Overall, 18mm Jaw
- Knipex 1-Piece Round Nose Plier Round, 125mm Overall, 27mm Jaw
- Knipex 1-Piece Nose Plier Straight, 125mm Overall, 27mm Jaw
- Knipex 1-Piece Plier, 119mm Overall, 23mm Jaw
- Knipex Cobra® 1-Piece Water Pump Plier, 125mm Overall, 27mm Jaw
- Knipex 1-Piece Flat Nose Plier Concave, 125mm Overall, 27mm Jaw
- Knipex 86 03 1-Piece Plier Wrench, 125mm Overall, 23mm Jaw
- Knipex 1-Piece Flat Nose Plier, 130mm Overall, 27mm Jaw
