INA WS81216 Roller Bearing Shaft Location Washer, 115 mm OD
- RS 제품 번호:
- 194-7404
- 제조사 부품 번호:
- WS81216
- 제조업체:
- INA
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩134,438.80
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩134,438.80 |
| 13 - 24 | ₩129,062.00 |
| 25 + | ₩126,373.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 194-7404
- 제조사 부품 번호:
- WS81216
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing Shaft Location Washer | |
| Outside Diameter | 115 mm | |
| Thickness | 8.5mm | |
| Inside Diameter | 80 mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing Shaft Location Washer | ||
Outside Diameter 115 mm | ||
Thickness 8.5mm | ||
Inside Diameter 80 mm | ||
Standards/Approvals No | ||
Single and double row axial cylindrical roller bearings are particularly suitable where:
High axial and shock loads occur in one direction but no radial loads are presentThe load carrying capacity of the corresponding axial deep groove ball bearings is no longer adequate (in this case, bearings of series 811 and 812 are especially suitable)
The bearing arrangement must have very high axial rigidity
The axial space available is very small
The bearing arrangement can be configured, where the axial space is very small, as a direct bearing arrangement
The bearing parts can or must be mounted separatelyThe bearing arrangement is not configured in itself but, for cost reasons, ready-to-fit standard bearings are to be used
관련된 링크들
- INA WS89306 Roller Bearing Shaft Location Washer, 60 mm OD
- INA WS89307 Roller Bearing Shaft Location Washer, 68 mm OD
- INA WS81212 Roller Bearing Shaft Location Washer, 95 mm OD
- INA WS81213 Roller Bearing Shaft Location Washer, 100 mm OD
- INA WS81214 Roller Bearing Shaft Location Washer, 105 mm OD
- INA WS81215 Roller Bearing Shaft Location Washer, 110 mm OD
- INA WS81217 Roller Bearing Shaft Location Washer, 125 mm OD
- INA WS81220 Roller Bearing Shaft Location Washer, 150 mm OD