대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩36,584.80
재고있음
- 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩36,584.80 |
| 13 - 24 | ₩35,137.20 |
| 25 + | ₩34,385.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 191-3872
- 제조사 부품 번호:
- GE15-UK
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Plain Bearing | |
| Bore Size | 15 mm | |
| Outside Diameter | 26 mm | |
| Static Load Rating - Radial | 44.6kN | |
| Width | 10 mm | |
| Standards/Approvals | No | |
| Series | GE | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Plain Bearing | ||
Bore Size 15 mm | ||
Outside Diameter 26 mm | ||
Static Load Rating - Radial 44.6kN | ||
Width 10 mm | ||
Standards/Approvals No | ||
Series GE | ||
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
관련된 링크들
- INA GE6-UK 6 mm Bore Plain Bearing, 14 mm OD, 9 kN
- SKF GE 15 ES-2RS 15 mm Bore Plain Bearing, 26 mm OD, 85 kN
- INA GE30-PB 30 mm Bore Plain Bearing, 55 mm OD, 159 kN
- INA GE12-DO 12 mm Bore Plain Bearing, 22 mm OD, 54 kN
- INA GE20-FW 20 mm Bore Plain Bearing, 42 mm OD, 128 kN
- INA GE6-DO 6 mm Bore Plain Bearing, 14 mm OD, 17 kN
- INA GE35-DO-2RS 35 mm Bore Plain Bearing, 55 mm OD, 400 kN
- INA GE40-DO-2RS 40 mm Bore Plain Bearing, 62 mm OD, 496 kN