The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.

Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)

수량	한팩당	한팩당*
10 - 240	₩1,526.56	₩15,265.60
250 +	₩1,496.48	₩14,964.80

모두 선택	제품 정보	값
	브랜드	Microchip
	Standard Supported	IEEE 802.3
	Number of Channels per Chip	1
	Typical Data Rate	100Mbit/s
	Integrated CDR	Yes
	Mounting Type	Surface Mount
	Package Type	QFN
	Pin Count	24
	Dimensions	4 x 4 x 0.83mm
	Maximum Operating Temperature	+70 °C
	Minimum Operating Temperature	0 °C

	모두 선택
	브랜드 Microchip
	Standard Supported IEEE 802.3
	Number of Channels per Chip 1
	Typical Data Rate 100Mbit/s
	Integrated CDR Yes
	Mounting Type Surface Mount
	Package Type QFN
	Pin Count 24
	Dimensions 4 x 4 x 0.83mm
	Maximum Operating Temperature +70 °C
	Minimum Operating Temperature 0 °C

Microchip , 1-Channel Ethernet Transceiver 24-Pin QFN, KSZ8081RNDCA-TR

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

관련된 링크들