Microchip KSZ8081RNDCA-TR, Ethernet Transceiver, 1.8 V 100 Mbps RMII v1.2, 24-Pin 3.3 V QFN

모든 Physical Layer Transceivers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 1000 units)*

₩1,466,400.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 2월 02일 부터 1,000 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
1000 - 4000₩1,466.40₩1,466,400.00
5000 +₩1,436.32₩1,437,072.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-2820
제조사 부품 번호:
KSZ8081RNDCA-TR
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Ethernet Transceiver

Maximum Data Rate

100Mbps

Sub Type

PHY

Communication Mode

100Base-TX, 10Base-T

Interface Type

RMII v1.2

Standard Supported

IEEE 802.3

Mount Type

Surface Mount

Package Type

QFN

Pin Count

24

Maximum Supply Voltage

3.3V

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Height

1mm

Standards/Approvals

RoHS

Length

4mm

Minimum Supply Voltage

1.8V

Width

4 mm

Automotive Standard

No

Supply Current

47mA

The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.

Ethernet transceiver

MII Interface support (KSZ8081MNX)

RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)

RMII back-to-back mode support for a 100Mbps copper repeater

MDC/MDIO management Interface for PHY register configuration

Programmable interrupt output

LED outputs for link and activity status indication

On-chip termination resistors for the differential pairs

Baseline wander correction

HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option

Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)

관련된 링크들