Block 15V ac 1 Output Through Hole PCB Transformer, 0.35VA
- RS 제품 번호:
- 732-0281
- 제조사 부품 번호:
- VB 0,35/1/15
- 제조업체:
- Block
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩15,998.80
마지막 RS 재고
- 최종적인 2 개 unit(s)이 배송 준비 됨
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩15,998.80 |
| 10 - 24 | ₩15,660.40 |
| 25 - 49 | ₩15,040.00 |
| 50 - 99 | ₩14,720.40 |
| 100 + | ₩14,400.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 732-0281
- 제조사 부품 번호:
- VB 0,35/1/15
- 제조업체:
- Block
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Block | |
| Secondary Voltage Rating | 15V ac | |
| Power Rating | 0.35VA | |
| Primary Voltage Rating | 230V ac | |
| Number of Outputs | 1 | |
| Length | 22mm | |
| Width | 22.7mm | |
| Depth | 15mm | |
| Dimensions | 22 x 22.7 x 15mm | |
| Weight | 20g | |
| Mounting Type | Through Hole | |
| Maximum Temperature | +70°C | |
| Minimum Operating Frequency | 50Hz | |
| Maximum Operating Frequency | 60Hz | |
| 모두 선택 | ||
|---|---|---|
브랜드 Block | ||
Secondary Voltage Rating 15V ac | ||
Power Rating 0.35VA | ||
Primary Voltage Rating 230V ac | ||
Number of Outputs 1 | ||
Length 22mm | ||
Width 22.7mm | ||
Depth 15mm | ||
Dimensions 22 x 22.7 x 15mm | ||
Weight 20g | ||
Mounting Type Through Hole | ||
Maximum Temperature +70°C | ||
Minimum Operating Frequency 50Hz | ||
Maximum Operating Frequency 60Hz | ||
- COO (Country of Origin):
- DE
Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Standards
EN 61558
Approvals
ENEC 10; UL recognised component
Approvals
VDE; UL
Standards
EN 61558
관련된 링크들
- Block 15V ac 2 Output Through Hole PCB Transformer, 0.35VA
- Block 6V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 12V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 24V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 18V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 9V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 15V ac 1 Output Through Hole PCB Transformer, 1VA
- Block 15V ac 1 Output Through Hole PCB Transformer, 0.5VA