Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 2 Contact(s), 3 mm Pitch, 1 Row, Shrouded

RS 제품 번호:: 670-4698
Distrelec 제품 번호:: 304-42-700
제조사 부품 번호:: 43650-0200
제조업체:: Molex

Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 2 Contact(s), 3 mm Pitch, 1 Row, Shrouded

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 pack of 5 units)*

₩7,463.60

재고있음

285 개 단위 배송 준비 완료
추가로 2026년 1월 23일 부터 3,665 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
5 - 95	₩1,492.72	₩7,463.60
100 - 370	₩1,462.64	₩7,313.20
375 - 1495	₩1,432.56	₩7,162.80
1500 - 7495	₩1,410.00	₩7,050.00
7500 +	₩1,173.12	₩5,865.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 670-4698
Distrelec 제품 번호:: 304-42-700
제조사 부품 번호:: 43650-0200
제조업체:: Molex

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Molex
	Series	Micro-Fit 3.0
	Product Type	PCB Header
	Current	5A
	Pitch	3mm
	Housing Material	Thermoplastic
	Number of Contacts	2
	Number of Rows	1
	Orientation	Right Angle
	Shrouded/Unshrouded	Shrouded
	Mount Type	Through Hole
	Connector System	Wire-to-Board
	Contact Material	Brass
	Contact Plating	Tin
	Row Pitch	3mm
	Termination Type	Solder
	Minimum Operating Temperature	-40°C
	Contact Gender	Male
	Maximum Operating Temperature	105°C
	Standards/Approvals	No
	Voltage	250 V

	모두 선택
	브랜드 Molex
	Series Micro-Fit 3.0
	Product Type PCB Header
	Current 5A
	Pitch 3mm
	Housing Material Thermoplastic
	Number of Contacts 2
	Number of Rows 1
	Orientation Right Angle
	Shrouded/Unshrouded Shrouded
	Mount Type Through Hole
	Connector System Wire-to-Board
	Contact Material Brass
	Contact Plating Tin
	Row Pitch 3mm
	Termination Type Solder
	Minimum Operating Temperature -40°C
	Contact Gender Male
	Maximum Operating Temperature 105°C
	Standards/Approvals No
	Voltage 250 V

Molex PCB Header, Black Colour, Right-Angle Body Orientation - Micro-Fit 3.0 Series - 43650-0200

Keen to connect your components in a flash? Choose this two-way PCB header from Molex to link accessories such as sensors, displays or communication devices to your board. A locking ramp ensures modules are attached securely and there's no risk of accidental detachment that could cause a glitch in your system. Flame-retardant liquid crystal polymer housing means this unit can handle extreme temperatures of up to +265°C during IR reflow soldering without breaking a sweat.

Features & Benefits

• Brass contacts resist corrosion and wear to deliver long-term service

• Plastic peg PCB locks make installation speedy

• 5A current rating ensures seamless compatibility with standard components

Applications

• Renewable energy generation

• Transportation systems

• Consumer electronics

How do I mount this header?

Installation is a matter of just slotting the header's pins through corresponding holes on your board and soldering them in place.

Molex Micro-Fit 3.0 3.0mm Single Row PCB Headers with Snap in Plastic Peg PCB Lock, 43650 Series

Micro-Fit 3.0 3mm pitch wire to board single row PCB headers which form part of a Compact power connector system providing a low to mid-range power distribution solution. With the Ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are MADE of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs

Features and Benefits

• High current carrying capacity in a small footprint

• High temperature housings for IR reflow soldering

• Through hole versions SMT compatible

• Positive latching for secure mating connection

• Fully isolated dual beam terminals for reliable electrical performance and contact

• Plastic peg PCB locks for secure connection to PCB

• Glow Wire Compliant

Product Application Information

These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:

Military COTS (Commercial Off The Shelf)

Solar power

Consumer products (dryers, freezers, fridges, washing machines)

Data communications (routers, servers)

Medical

Telecommunications

Gaming terminals