JST NV Series Top Entry Through Hole PCB Header, 2 Contact(s), 5 mm Pitch, 1 Row, Shrouded
- RS 제품 번호:
- 185-6896
- 제조사 부품 번호:
- B02P-NV (LF)(SN)
- 제조업체:
- JST
대량 구매 할인 기용 가능
Subtotal (1 pack of 50 units)*
₩15,322.00
재고있음
- 추가로 2025년 12월 29일 부터 2,700 개 단위 배송
- 추가로 2026년 1월 05일 부터 1,750 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 50 - 50 | ₩306.44 | ₩15,340.80 |
| 100 - 250 | ₩298.92 | ₩14,964.80 |
| 300 - 550 | ₩291.40 | ₩14,588.80 |
| 600 - 750 | ₩283.88 | ₩14,222.20 |
| 800 + | ₩278.24 | ₩13,865.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 185-6896
- 제조사 부품 번호:
- B02P-NV (LF)(SN)
- 제조업체:
- JST
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | JST | |
| Series | NV | |
| Product Type | PCB Header | |
| Current | 10A | |
| Pitch | 5mm | |
| Number of Contacts | 2 | |
| Housing Material | Polyamide | |
| Number of Rows | 1 | |
| Orientation | Top Entry | |
| Shrouded/Unshrouded | Shrouded | |
| Mount Type | Through Hole | |
| Connector System | Wire-to-Board | |
| Contact Material | Brass | |
| Row Pitch | 5mm | |
| Termination Type | Solder | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Tail Pin Length | 3.7mm | |
| Contact Gender | Male | |
| Mating Pin Length | 7.7mm | |
| Standards/Approvals | No | |
| Voltage | 250 V | |
| 모두 선택 | ||
|---|---|---|
브랜드 JST | ||
Series NV | ||
Product Type PCB Header | ||
Current 10A | ||
Pitch 5mm | ||
Number of Contacts 2 | ||
Housing Material Polyamide | ||
Number of Rows 1 | ||
Orientation Top Entry | ||
Shrouded/Unshrouded Shrouded | ||
Mount Type Through Hole | ||
Connector System Wire-to-Board | ||
Contact Material Brass | ||
Row Pitch 5mm | ||
Termination Type Solder | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Tail Pin Length 3.7mm | ||
Contact Gender Male | ||
Mating Pin Length 7.7mm | ||
Standards/Approvals No | ||
Voltage 250 V | ||
- COO (Country of Origin):
- JP
Suitable for a wide range of applications, from low-voltage, low-current signal circuits to power supply circuits requiring large currents. Compact connector (mounting height of 16.5mm) with a large capacity (10A). Side stackable. Connectors can be stacked side by side without causing pitch loss, and thus the number of circuits can easily be changed even after the design is finalized.
Side stackable
Connectors can be stacked side by side without causing pitch loss, and thus the number of circuits can easily be changed even after the design is finalized. This increases the engineer's freedom in designing printed circuit boards.
Box contact
This connector has been the box-shaped contact. The reliable NV connector can be used in a wide variety of applications, from low-voltage, low-current signal circuits to power supply circuits having a relatively large capacity.
Compact connector with a large capacity
Even though this connector has a large current carrying capacity (10A), it is compact, with a mounting height of 16.5mm (.650").
Secure contact and mounting
The housing has an arm lock mechanism which prevents the connector from working loose due to vibration. The mechanism also prevents mis insertion (misalignment or reverse insertion).
관련된 링크들
- JST NV Series Top Entry Through Hole PCB Header, 3 Contact(s), 5 mm Pitch, 1 Row, Shrouded
- JST NV Series Top Entry Through Hole PCB Header, 4 Contact(s), 5 mm Pitch, 1 Row, Shrouded
- JST XL Series Top Entry Through Hole PCB Header, 2 Contact(s), 5 mm Pitch, 2 Row, Shrouded
- JST PSI Series Top Entry Through Hole PCB Header, 2 Contact(s), 4 mm Pitch, 1 Row, Shrouded
- JST ASPH Series Top Entry Surface PCB Header, 3 Contact(s), 1 mm Pitch, 1 Row, Shrouded
- JST XL Series Top Entry Through Hole PCB Header, 16 Contact(s), 5 mm Pitch, 2 Row, Shrouded
- JST XL Series Top Entry Through Hole PCB Header, 6 Contact(s), 5 mm Pitch, 2 Row, Shrouded
- JST XL Series Top Entry Through Hole PCB Header, 8 Contact(s), 5 mm Pitch, 2 Row, Shrouded
