Hirose DF1BZ Series Straight Through Hole PCB Header, 34 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- RS 제품 번호:
- 176-7380
- 제조사 부품 번호:
- DF1BZ-34DP-2.5DSA
- 제조업체:
- Hirose
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 100 units)*
₩126,148.00
일시적 품절
- 2026년 1월 01일 부터 100 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 100 - 100 | ₩1,261.48 | ₩126,204.40 |
| 200 - 300 | ₩1,229.52 | ₩123,046.00 |
| 400 + | ₩1,210.72 | ₩121,166.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 176-7380
- 제조사 부품 번호:
- DF1BZ-34DP-2.5DSA
- 제조업체:
- Hirose
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Hirose | |
| Product Type | PCB Header | |
| Series | DF1BZ | |
| Current | 3A | |
| Pitch | 2.5mm | |
| Housing Material | Polyamide | |
| Number of Contacts | 34 | |
| Number of Rows | 2 | |
| Orientation | Straight | |
| Shrouded/Unshrouded | Shrouded | |
| Mount Type | Through Hole | |
| Connector System | Wire-to-Board | |
| Contact Plating | Tin | |
| Contact Material | Brass | |
| Minimum Operating Temperature | -35°C | |
| Termination Type | Solder | |
| Row Pitch | 2.5mm | |
| Tail Pin Length | 3.6mm | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Mating Pin Length | 4.5mm | |
| Voltage | 650 V | |
| 모두 선택 | ||
|---|---|---|
브랜드 Hirose | ||
Product Type PCB Header | ||
Series DF1BZ | ||
Current 3A | ||
Pitch 2.5mm | ||
Housing Material Polyamide | ||
Number of Contacts 34 | ||
Number of Rows 2 | ||
Orientation Straight | ||
Shrouded/Unshrouded Shrouded | ||
Mount Type Through Hole | ||
Connector System Wire-to-Board | ||
Contact Plating Tin | ||
Contact Material Brass | ||
Minimum Operating Temperature -35°C | ||
Termination Type Solder | ||
Row Pitch 2.5mm | ||
Tail Pin Length 3.6mm | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Mating Pin Length 4.5mm | ||
Voltage 650 V | ||
- COO (Country of Origin):
- MY
New Insulation Displacement and Crimping Ideas:
This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained.
By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case.
After connection, the contact can be replaced in excellent maintainability.
Because the insulation displacement area is protected by the case, high reliability can be assured.
관련된 링크들
- Hirose DF1BZ Series Straight Through Hole PCB Header, 34 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 28 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Straight Through Hole PCB Header, 10 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Straight Through Hole PCB Header, 18 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Straight Through Hole PCB Header, 40 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 22 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 24 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 20 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded