JST PH Series Straight Through Hole PCB Header, 11 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- RS 제품 번호:
- 175-5613
- 제조사 부품 번호:
- B11B-PH-K-S (LF)(SN)
- 제조업체:
- JST
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩4,681.20
재고있음
- 추가로 2026년 1월 16일 부터 60 개 단위 배송
- 추가로 2026년 1월 23일 부터 720 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 40 | ₩468.12 | ₩4,681.20 |
| 50 - 90 | ₩456.84 | ₩4,568.40 |
| 100 - 240 | ₩445.56 | ₩4,455.60 |
| 250 - 490 | ₩438.04 | ₩4,380.40 |
| 500 + | ₩424.88 | ₩4,248.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 175-5613
- 제조사 부품 번호:
- B11B-PH-K-S (LF)(SN)
- 제조업체:
- JST
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | JST | |
| Product Type | PCB Header | |
| Series | PH | |
| Current | 2A | |
| Pitch | 2mm | |
| Number of Contacts | 11 | |
| Housing Material | Polyamide | |
| Number of Rows | 1 | |
| Orientation | Straight | |
| Shrouded/Unshrouded | Shrouded | |
| Connector System | Wire-to-Board | |
| Mount Type | Through Hole | |
| Contact Plating | Tin | |
| Contact Material | Brass | |
| Termination Type | Crimp | |
| Minimum Operating Temperature | -25°C | |
| Row Pitch | 2mm | |
| Contact Gender | Male | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Voltage | 100 V | |
| 모두 선택 | ||
|---|---|---|
브랜드 JST | ||
Product Type PCB Header | ||
Series PH | ||
Current 2A | ||
Pitch 2mm | ||
Number of Contacts 11 | ||
Housing Material Polyamide | ||
Number of Rows 1 | ||
Orientation Straight | ||
Shrouded/Unshrouded Shrouded | ||
Connector System Wire-to-Board | ||
Mount Type Through Hole | ||
Contact Plating Tin | ||
Contact Material Brass | ||
Termination Type Crimp | ||
Minimum Operating Temperature -25°C | ||
Row Pitch 2mm | ||
Contact Gender Male | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Voltage 100 V | ||
- COO (Country of Origin):
- MY
This is a Thin, Low-Profile 2.0mm Pitch Connector 8.0mm in Height After Mounting and 4.5mm in Width. It is Designed to Meet The Demand for High-Density Connection of internal Wire to Printed Circuit Broads. It is Compact, Highly Reliable and Low in Cost.
The dimple at the center of the contact ensures positive contact and low contact resistance at all times.
The contact has a long wire strip holding length of 2.6 +/-0.4mm.
Fully shrouded header
The same shrouded header can be used for the KR/KRD/CR insulation displacement connectors.
관련된 링크들
- JST PH Series Straight Through Hole PCB Header, 11 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- JST PH Series Right Angle Surface PCB Header Crimping Tool, 11 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- JST PCB Header, Shrouded
- JST PH Series Straight Through Hole PCB Header, 9 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- JST PH Series Straight Through Hole PCB Header, 13 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- JST PH Series Straight Through Hole PCB Header, 12 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- JST PH Series Straight Through Hole PCB Header, 4 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- JST PH Series Straight Through Hole PCB Header, 2 Contact(s), 2 mm Pitch, 1 Row, Shrouded