TE Connectivity 2481779-4 Series Vertical Surface PCB Header, 4 Contact(s), 1.5 mm Pitch, 1 Row, Shrouded
- RS 제품 번호:
- 671-464
- 제조사 부품 번호:
- 2481779-4
- 제조업체:
- TE Connectivity
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 reel of 1400 units)*
₩3,176,725.50
재고있음
- 추가로 2026년 5월 11일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
릴당 | 릴당 | 한팩당* |
|---|---|---|
| 1 + | ₩3,176,725.50 | ₩2,269.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 671-464
- 제조사 부품 번호:
- 2481779-4
- 제조업체:
- TE Connectivity
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | TE Connectivity | |
| Product Type | PCB Header | |
| Series | 2481779-4 | |
| Pitch | 1.5mm | |
| Current | 3A | |
| Housing Material | Liquid Crystal Polymer | |
| Number of Contacts | 4 | |
| Number of Rows | 1 | |
| Orientation | Vertical | |
| Shrouded/Unshrouded | Shrouded | |
| Mount Type | Surface | |
| Connector System | Wire-to-Board | |
| Contact Material | Copper Alloy | |
| Contact Plating | Tin over Nickel | |
| Termination Type | Surface Mount | |
| Minimum Operating Temperature | -40°C | |
| Row Pitch | 1.5mm | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | UL 94V-0 | |
| Voltage | 50V | |
| 모두 선택 | ||
|---|---|---|
브랜드 TE Connectivity | ||
Product Type PCB Header | ||
Series 2481779-4 | ||
Pitch 1.5mm | ||
Current 3A | ||
Housing Material Liquid Crystal Polymer | ||
Number of Contacts 4 | ||
Number of Rows 1 | ||
Orientation Vertical | ||
Shrouded/Unshrouded Shrouded | ||
Mount Type Surface | ||
Connector System Wire-to-Board | ||
Contact Material Copper Alloy | ||
Contact Plating Tin over Nickel | ||
Termination Type Surface Mount | ||
Minimum Operating Temperature -40°C | ||
Row Pitch 1.5mm | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals UL 94V-0 | ||
Voltage 50V | ||
비준수
- COO (Country of Origin):
- CN
The TE Connectivity Mini CT Low Profile Inverted Through Board Connectors provide a small form factor solution to bring power into a conventional or aluminium-clad printed circuit board from the underside of the board. This addresses the challenges of dressing wires on the TOP side of LED boards resulting in low profile, less obstructed PCB layout designs. The headers mate with 1.5 mm centreline AMP Mini CT cable assemblies. They facilitate a simpler assembly of solid state LED lighting for architectural, residential, and commercial applications. The connector is positioned through a cutout or notch in PCB and sits only 1.6mm above the board and surface mount hold downs provide stability during connector mating and unmating. The low profile form factor, combined with a rounded edge design allows for minimal shadowing in lighting applications.
Reduced shadowing in lighting applications
Low profile design of 1.6mm above the board
Mates with economical Mini CT plugs
High temperature material for reflow processing
Flat TOP surface allows for vacuum pick up
Tape and reel packaging for high speed SMT processing
RoHS compliant
Applications
Indoor and outdoor lighting fixtures
General LED illumination fixtures
LED lighting controls
Various non lighting applications that require wire dress connections below the PCB
관련된 링크들
- TE Connectivity 2481779-4 Series Vertical Surface PCB Header, 4 Contact(s), 1.5 mm Pitch, 1 Row, Shrouded
- TE Connectivity 2481779-2 Series Vertical Surface PCB Header, 2 Contact(s), 1.5 mm Pitch, 1 Row, Shrouded
- TE Connectivity 2481779-5 Series Vertical Surface PCB Header, 5 Contact(s), 1.5 mm Pitch, 1 Row, Shrouded
- TE Connectivity Free Height Series Vertical, Vertical PCB, PCB PCB Header, 64 Contact(s), 1 mm Pitch, 32 Row, Shrouded
- TE Connectivity AMPMODU Series Vertical, Vertical PCB, PCB PCB Header, 2 Contact(s), 2.54 mm Pitch, 1 Row, Shrouded
- TE Connectivity HPI Series Vertical Surface PCB Header, 4 Contact(s), 2 mm Pitch, 1 Row, Shrouded
- TE Connectivity SGI 1.5 Series Vertical PCB PCB Header, 4 Contact(s), 1.5 mm Pitch, 2 Row, Shrouded
- TE Connectivity 2496750 Series Vertical Surface Mount PCB Header, 4 Contact(s), 1.25 mm Pitch, 1 Row, Shrouded