제조사부품번호

Broadcom ACPL-217-50BE DC Input Optocoupler, Surface, 4-Pin SOIC

RS 제품 번호:: 818-8246
제조사 부품 번호:: ACPL-217-50BE
제조업체:: Broadcom

Broadcom ACPL-217-50BE DC Input Optocoupler, Surface, 4-Pin SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 20 units)*

₩13,680.00

80 개 단위 배송 준비 완료
추가로 2026년 9월 30일 부터 15,880 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
20 - 740	₩684.00	₩13,680.00
760 - 1480	₩670.00	₩13,400.00
1500 +	₩656.00	₩13,100.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 818-8246
제조사 부품 번호:: ACPL-217-50BE
제조업체:: Broadcom

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Broadcom
	Product Type	Optocoupler
	Mount Type	Surface
	Output Type	Transistor
	Maximum Forward Voltage	1.4V
	Number of Channels	1
	Packaging	Tape & Reel
	Number of Pins	4
	Package Type	SOIC
	Input Current Type	DC
	Typical Rise Time	2μs
	Maximum Input Current	5mA
	Isolation Voltage	3000Vrms
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	110°C
	Maximum Current Transfer Ratio	260%
	Minimum Current Transfer Ratio	50%
	Standards/Approvals	EN, UL, IEC
	Typical Fall Time	3μs
	Series	ACPL
	Automotive Standard	No

	모두 선택
	브랜드 Broadcom
	Product Type Optocoupler
	Mount Type Surface
	Output Type Transistor
	Maximum Forward Voltage 1.4V
	Number of Channels 1
	Packaging Tape & Reel
	Number of Pins 4
	Package Type SOIC
	Input Current Type DC
	Typical Rise Time 2μs
	Maximum Input Current 5mA
	Isolation Voltage 3000Vrms
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 110°C
	Maximum Current Transfer Ratio 260%
	Minimum Current Transfer Ratio 50%
	Standards/Approvals EN, UL, IEC
	Typical Fall Time 3μs
	Series ACPL
	Automotive Standard No

ACPL-217 DC Input , Half-Pitch Phototransistor Optocoupler Data Sheet

Broadcom ACPL Series Optocoupler, 3000Vrms Isolation Voltage, 50% Minimum Current Transfer Ratio - ACPL-217-50BE

This optocoupler provides electrical isolation between input and output for DC control signals on PCB assemblies. Housed in an SOIC surface-mount package and supplied on tape and reel, it is intended for single-channel signal transfer where high-voltage isolation and Compact board mounting are required. The device operates across a wide temperature span and conforms to recognised international safety standards.

Features and Benefits:

• 3000Vrms isolation delivers safe separation of circuits
• DC input supports low-current control applications
• 50-260% current transfer ratio enables varied gain conditions
• 2μs rise and 3μs fall times suit fast signalling
• 5mA maximum input current reduces drive requirements
• -55°C to 110°C operating range tolerates harsh environments

Applications

• Suitable for PCB-mount SOIC signal isolation tasks
• Used with low-voltage control logic Interfaces
• Ideal for surface-mount industrial sensor input separation
• Can be used for isolated communication line buffering
• Used for protected Interface circuits in power subsystems

What is the maximum input drive allowed?

The input should not exceed 5mA to remain within specified limits.

Which temperature extremes can the device withstand?

It operates from -55°C up to 110°C without performance data change.

How is the component supplied for automated assembly?

It is packaged on tape and reel compatible with pick-and-place processes.

Which approvals cover its safety credentials?

It holds approvals to EN, UL and IEC standards.