Broadcom DC Input Optocoupler, Surface Mount, 8-Pin DIP
- RS 제품 번호:
- 215-5725
- 제조사 부품 번호:
- ACPL-782T-500E
- 제조업체:
- Broadcom
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 reel of 1000 units)*
₩12,281,100.00
일시적 품절
- 2026년 8월 24일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 1000 - 1000 | ₩12,281.10 | ₩12,281,880.00 |
| 2000 - 9000 | ₩12,035.40 | ₩12,036,180.00 |
| 10000 + | ₩11,795.55 | ₩11,795,550.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 215-5725
- 제조사 부품 번호:
- ACPL-782T-500E
- 제조업체:
- Broadcom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Broadcom | |
| Product Type | Optocoupler | |
| Mount Type | Surface Mount | |
| Maximum Forward Voltage | 5.5V | |
| Number of Channels | 1 | |
| Packaging | Tape & Reel | |
| Number of Pins | 8 | |
| Package Type | DIP | |
| Input Current Type | DC | |
| Typical Rise Time | 2.96μs | |
| Maximum Input Current | 400mA | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | DIN EN 60747-5-2 UL CSA, IEC 60747-5-5 | |
| Typical Fall Time | 2.96μs | |
| Series | ACPL-782T | |
| Automotive Standard | AEC-Q100 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Broadcom | ||
Product Type Optocoupler | ||
Mount Type Surface Mount | ||
Maximum Forward Voltage 5.5V | ||
Number of Channels 1 | ||
Packaging Tape & Reel | ||
Number of Pins 8 | ||
Package Type DIP | ||
Input Current Type DC | ||
Typical Rise Time 2.96μs | ||
Maximum Input Current 400mA | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals DIN EN 60747-5-2 UL CSA, IEC 60747-5-5 | ||
Typical Fall Time 2.96μs | ||
Series ACPL-782T | ||
Automotive Standard AEC-Q100 | ||
681
The Broadcom ACPL-782T automotive isolation amplifier family was designed for current sensing in electronic motor drives and battery system. In a typical implementation, motor currents or battery current flow through an external resistor and the resulting analog voltage drop is sensed by the ACPL-782T. A differential output voltage is created on the other side of the ACPL-782T optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit.
Automotive Operating Temperature -40 to 125°C
15 kV/μs Common-Mode Rejection at VCM = 1000V
관련된 링크들
- Broadcom ACPL-782T-500E DC Input Optocoupler, Surface Mount, 8-Pin DIP
- Broadcom DC Input Optocoupler, Surface Mount, 5-Pin SO
- Broadcom DC Input Optocoupler, Surface Mount, 8-Pin SO
- Broadcom DC Input Optocoupler, Through Hole, 8-Pin DIP
- Broadcom ACPL-4800-000E DC Input Optocoupler, Through Hole, 8-Pin DIP
- Broadcom ACPL-K34T-500E DC Input Optocoupler, Surface Mount, 8-Pin SO
- Broadcom ACPL-M61T-500E DC Input Optocoupler, Surface Mount, 5-Pin SO
- Broadcom DC Input Optocoupler, Surface Mount, 8-Pin DIP