Vishay DC Input Optocoupler, Through Hole, 8-Pin DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Optocouplers 열람하기
현재 이용 불가
이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.
RS 제품 번호:
180-7143
제조사 부품 번호:
MCT6
제조업체:
Vishay
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Vishay

Product Type

Optocoupler

Mount Type

Through Hole

Maximum Forward Voltage

1.5V

Number of Channels

1

Number of Pins

8

Package Type

DIP

Input Current Type

DC

Maximum Input Current

60mA

Isolation Voltage

5.3kVrms

Logic Output

Yes

Minimum Operating Temperature

-55°C

Maximum Current Transfer Ratio

50%

Maximum Operating Temperature

100°C

Minimum Current Transfer Ratio

20%

Standards/Approvals

CSA 93751, DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending, IEC 60065, UL1577, BSI IEC 60950

Series

MCT6

Automotive Standard

No

COO (Country of Origin):
MY
The MCT6 is a two channel optocoupler for high density applications. Each channel consists of an optically coupled pair with a gallium arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The MCT6 is especially designed for driving medium-speed logic, where it may be used to eliminate troublesome ground loop and noise problems. It can also be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CRT modulation.

Current transfer ratio, 50 % typical

Leakage current, 1.0 nA typical

Two isolated channels per package

관련된 링크들