Rhopoint A210-091 Handheld Ohmmeter, 100 μΩ, 4 Wire

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Ohmmeters 열람하기

Subtotal (1 unit)*

₩1,573,165.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
  • 추가로 다른 지역에서 19 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,573,165.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
611-953
제조사 부품 번호:
M210
제조업체:
Rhopoint
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Rhopoint

Product Type

Ohmmeter

Resistance Resolution

100μΩ

Measurement Type

4 Wire

Battery Type

PP3

Power Source

Battery

Handheld

Yes

Minimum Operating Temperature

5°C

Maximum Accuracy

0.1 %

Maximum Operating Temperature

35°C

Height

150mm

Weight

510g

Standards/Approvals

No

Model Number

A210-091

Length

80mm

Width

38 mm

Minimum Accuracy

±0.1 %

제외

COO (Country of Origin):
GB

Rhopoint Digital Milliohm Meter


The Rhopoint digital milliohm meter is a portable, low resistance digital gauge designed to measure resistance between 1mohm and 200ohm. A high degree of accuracy is achieved by utilising a 4-terminal input to eliminate errors caused by test lead length. One of the most important features of the milliohm meter is its low test current rating of about 0.005A. This ensures the contact being tested is not harmed by the test current, which can happen when higher test currents are used that may lead to erroneous measurements.

Features and Benefits


Accuracy range is ±0.1%

Auto ranging (1.999ohm, 19.99ohm and 199.9ohm)

Auto switch OFF after 3 minutes

Continuous operation for 20 hours (from standard PP3 battery)

Fully calibrated and supplied with UKAS calibration certificate

Measurement increments of 0.001ohm, 0.01ohm and 0.1ohm

Single pushbutton operation

Supplied with a set of standard test leads with spring clip connectors

Applications


Aircraft bonding check

Earth conductor continuity

Network cabling

PCB (plated through-holes)

PCB (track resistance)

Relay, switch and connector contacts

RFI shielding and coil resistance

Ring circuit testing

Transformer and motor windings

Wire-wrapped and solder joints

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

관련된 링크들