Netscout LinkRunner AT-1000 Network Auto-Tester

LinkRunner™ AT Network Auto-Tester provides quick and complete copper and fibre optic network connectivity testing. This rugged, hand held network tester speeds troubleshooting and reporting with a complete one-button Autotest and zero-touch Link-Live cloud reporting. The Autotest performs your required set of connectivity tests in 10 seconds, enabling quick and accurate identification to solve network connectivity problems. Cloud reporting automatically uploads results to the Link-Live Cloud Service for project management and reporting.

Features and Benefits:

• Multiple user-configured Autotests

• Cable length measurement, fault location and fault type

• TruePower (tm) Power over Ethernet (PoE) measurement

• Ethernet speed and duplex verification at 10/100 Gbit rates

• Twisted pair and fibre optic link testing

• DHCP, DNS and Gateway connectivity tests

• Ping and TCP port connectivity tests to up to 10 user-selected targets

• Results saved on the tester or uploaded to the Link-Live Cloud Service with zero-touch

• Results, project and staff management using the Link-Live Cloud Service

• Packet reflection at rates up to 1 Gbps

Frequently asked questions:

What is a LAN cable tester?

LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

How do network cable testers work?

Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.

What is the difference between RJ45 & RJ11?

RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Supplied with

LinkRunner AT 1000 tester with 4 AA batteries, LinkRunner AT Manager software CD, USB cable, Getting Started Guide and soft case

Netscout

모두 선택	제품 정보	값
	브랜드	NetAlly
	Equipment Type	Auto Tester
	Connector Type	RJ45
	Tone	Yes
	Model Number p	LinkRunner LRAT-1000
	Power Source	Battery
	Battery Type	AA
	Battery Life	6 h
	Weight	500g
	Display Type	LCD
	Height	48mm
	Length	198mm
	Maximum Operating Temperature	+45°C
	Minimum Operating Temperature	0°C
	Width	89mm

	모두 선택
	브랜드 NetAlly
	Equipment Type Auto Tester
	Connector Type RJ45
	Tone Yes
	Model Number p LinkRunner LRAT-1000
	Power Source Battery
	Battery Type AA
	Battery Life 6 h
	Weight 500g
	Display Type LCD
	Height 48mm
	Length 198mm
	Maximum Operating Temperature +45°C
	Minimum Operating Temperature 0°C
	Width 89mm

NetAlly LinkRunner LRAT-1000 Auto Tester RJ45

대체품