Hilscher 1 Port PCI TX MCU Card, 100Mbps

N
모든 Network Cards 열람하기

Subtotal (1 unit)*

₩1,231,467.90

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 6월 16일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,231,467.90

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
694-265
제조사 부품 번호:
CIFX M3042100BM-RE\ET\F+ML
제조업체:
Hilscher
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Hilscher

Bus Type

PCI

Product Type

MCU Card

Network Speed

100Mbps

Interface Type

TX

Number of Ports

1

Maximum Data Transfer Rate

100Mbps

Standards/Approvals

UKCA

COO (Country of Origin):
DE

Hilscher PC Card, 100Mbps Network Speed, 2 Ports - CIFX M3042100BM-RE\\ET\\F+ML


This PC card provides dual-port Ethernet connectivity for industrial PCI slots, enabling deterministic network communication in automation and control environments. Designed for integration into equipment and host PCs, it facilitates fast data exchange over TX interfaces while meeting UKCA conformity standards for regional regulatory acceptance.

Features and Benefits:


• 100Mbps link capacity for low-latency data transfer
• Two independent ports to segregate network traffic
• PCI bus connection for direct host system integration
• TX Interface type supporting standard copper Ethernet cabling
• UKCA marking ensuring regional regulatory alignment

Applications


• Suitable for connecting PLCs to factory networks for control tasks
• Ideal for use in industrial PC-based I/O aggregation systems
• Used with protocol gateways requiring dual independent network links
• Can be used for machine-vision pre-processing with separate data lanes

What bus Interface does it require to operate in a host system?


It installs into a PCI expansion slot and communicates directly with the host via the PCI bus architecture.

How many physical network connections are exposed and what are their roles?


There are two RJ45-equivalent TX ports allowing separation of control and diagnostic traffic or link redundancy.

What network throughput can be expected for typical industrial messages?


Each port supports up to 100Mbps, suitable for cyclic control telegrams and event-driven messages within common automation cycles.

Is there a specific standard marking indicating regional acceptance?


The product carries the UKCA marking which denotes conformity with applicable UK regulatory requirements.

Which Interface type should cabling and switches support for compatibility?


Cabling and switches must support TX copper Ethernet to match the card’s Interface type.

관련된 링크들