RS PRO IDM91E Handheld Digital Multimeter

모든 Multimeters 열람하기

Subtotal (1 unit)*

₩150,512.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 42 개 단위 배송 준비 완료
  • 추가로 2026년 5월 12일 부터 300 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩150,512.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
123-3244
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Multimeter Type

Handheld

Product Type

Multimeter

Display Type

Digital

Model Number

IDM91E

Resistance Resolution

100mΩ

Functions Measured

DC Voltage, Continuity, DC Current, Diode, Resistance, AC Current, AC Voltage

Maximum DC Voltage Measurement

600V

True RMS

No

DC Current Accuracy

±1 % rdg + 1 Digits

AC Current Accuracy

±2.5 % rdg + 3 Digits

AC Voltage Accuracy

±1.25 % rdg + 4 Digits

DC Voltage Accuracy

±0.5% rdg + 1 Digits

AC Current Resolution

0.1μA ac

AC Voltage Resolution

0.1mV ac

DC Voltage Resolution

0.1 mV

DC Current Resolution

0.1μA dc

Power Source

Battery

Minimum Operating Temperature

0°C

Resistance Measurement Accuracy

±0.75% + 1 Digits

Battery Life

300h

Maximum Operating Temperature

50°C

Height

192mm

Width

50 mm

Length

95mm

Weight

550g

Standards/Approvals

No

Safety Category Level

CAT III

Battery Type

IEC 6F22, NEDA 1604

Safety Category Voltage

600V

COO (Country of Origin):
TW

RS PRO IDM91E Rugged Industrial Digital Multimeter


RS PRO IDM91E digital multimeter (DMM) designed for harsh environments. This handheld DMM is a tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. The rugged body guarantees drop prof resistance from up to 1.5 m. The multimeter is also waterproof with a rating of IP54. Featuring fuse protection on both 200 mA and 10 A current ranges and a specially designed beep guard system. That system provides a constant beep warning if the test leads put in the current jacks and select an incorrect function.

The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.

RS PRO IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.

This device has been designed for the most demanding users that value solid construction and highly accurate measurements.

Features and Benefits


• 3 1/2 digit LCD

• 0.5% basic DCV accuracy

• 1.3% basic ACV accuracy

• 1.0% basic DCA accuracy

• 1.5% basic ACA accuracy

• 0.75% basic OHM accuracy

• Continuity and diode test

• 500V dual-fuse protection

• Auto power-off

• Beep Guard™ warning system

• Water resistant rating IP64

• 1.5m (5 feet) dropproof

• Protective holster with tilt stand

• IEC 1010-1 CAT.III 600V/ CAT.II 1000V

• One set of 1:1 probe

What does it measure?


DC and AC Voltages - up to 600 V

DC and AC Current - up to 10A

Resistance and continuity checking - up to 20 MΩ

Diode - open circuit voltage up to 3.2V

Batteries?


300 Hours (Alkaline)

Single 9V (NEDA 1604 or IEC 6F22)

Low battery indicator

Auto power off - approx 30 minutes after the last operation

What It Incudes?


Installed battery

Test Leads

User manual

Protective holster

Dimensions:


Without Holster:

Width 84 mm

Length 175 mm

Height 31 mm

With Holster:

Width 95 mm

Length 192 mm

Height 50 mm

Typical Applications:

A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:

Electrical and electronic industries

Safety guidelines

When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

Standards

IEC 61010-1, CAT.III 300 v, CAT.II 600 V

관련된 링크들