Amprobe PM55A Digital Multimeter, 2 mA ac, 2 mA dc, 600 V

Subtotal (1 unit)*

₩185,340.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩185,340.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
412-018
Distrelec 제품 번호:
176-04-069
제조사 부품 번호:
PM55A
제조업체:
Amprobe
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Amprobe

Multimeter Type

Digital

Product Type

Multimeter

Model Number

PM55A

Display Type

LCD

Functions Measured

AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Diode Test, Frequency, Resistance

Maximum AC Voltage Measurement

600V

Maximum DC Voltage Measurement

600V

Maximum DC Current Measurement

2mA dc

Maximum Resistance Measurement

6000kΩ

Maximum AC Current Measurement

2mA ac

True RMS

No

DC Voltage Accuracy

±1.5 % rdg + 5 Digits

AC Voltage Accuracy

±1.5 % rdg + 5 Digits

DC Voltage Resolution

1 mV dc

AC Voltage Resolution

1mV ac

Maximum Frequency

30kHz

Power Source

Battery

Minimum Operating Temperature

0°C

Resistance Measurement Accuracy

±2 % rdg + 4 Digits

Maximum Operating Temperature

40°C

Standards/Approvals

No

Length

113mm

Weight

78g

Width

53mm

Height

10.2mm

Safety Category Level

CAT II

Battery Type

CR2032

Safety Category Voltage

300V, 600V

제외

COO (Country of Origin):
TW

Fluke Multimeter, 600V Safety Category Voltage, 78g Weight - PM55A


This multimeter is a handheld digital instrument designed to measure electrical parameters in field and workshop settings. It operates from a CR2032 battery and provides a range of AC and DC measurements, Plus Basic component checks, for routine electrical troubleshooting and verification within a 0°C-40°C ambient.

Features and Benefits:


• ±1.5% DC accuracy delivers precise voltage readings
• 1mV DC resolution enables fine voltage discrimination
• 600V safety rating allows work on low-voltage installations
• 6000kΩ resistance range assesses high-value components
• 30kHz frequency capability measures common signal sources
• 2mA current range supports low-current diagnostics

Applications


• Suitable for fault-finding in domestic electrical systems
• Ideal for testing component values on small PCBs
• Used for measuring supply voltages up to 600V
• Can be used for frequency checks on control circuits
• Used with diodes and capacitors for Basic component tests

What battery type powers the device?


It uses a CR2032 coin cell battery for Compact power.

What environmental limits affect operation?


It is rated to operate between 0°C and 40°C.

What safety classification applies to voltage work?


The instrument is rated to CAT II for voltages up to 600V.

What display and measurement format does it use?


Measurements are shown on a digital display with true numerical readouts.

How much does the instrument weigh for portability?


The unit has a mass of 78 g.

Note

This instrument is fitted with fixed test leads. Use of an alternative instrument is advised where GS38 compliant leads (fused test leads) are required.

Supplied with

Protective silicon holster, attached test leads, battery, deluxe carry case and instruction manual.

관련된 링크들