RS PRO Fused Test Lead Kit, CAT III, 500mA

모든 Multimeter Leads 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩117,913.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 4 개 단위 배송 준비 완료
  • 추가로 다른 지역에서 228 개 단위 배송 준비 완료
  • 추가로 2026년 3월 05일 부터 144 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩117,913.60
5 +₩97,045.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
731-5273
Distrelec 제품 번호:
303-91-156
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Lead Type

Test Lead Kit

Product Type

Multimeter Leads

Connector Type

Spring Hook, Crocodile Clip, Right Angle Plug, Straight Plug

Current

500mA

Fused

Yes

Lead Length

1.2m

Safety Category Voltage

600V

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

70°C

Safety Category Level

CAT III

Standards/Approvals

EC 1010, IEC 10101, and 2015/863

COO (Country of Origin):
GB

RS PRO Multimeter Lead Set in Pouch


RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Contents Standard Set


2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).

Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:

Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets

Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications

Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.

Test and Measurement

Safety Precautions

Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

Warning

Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.

Standards

EC 1010 Cat III 600V; GS38

관련된 링크들