Keysight Technologies 11059A Kelvin Probe Set

The Keysight 11059A test leads feature gold plated kelvin probes for precise measurement of low-value resistance components. Perfect for applications which require a clear and accurate reading. All models are highly reliable and excellent quality.

• 4-wire measurement method to eliminate the resistance of the test leads
• Ground guard connector removes ground-related errors.
• Maximum voltage 42V: Cable length: 0.8m
• Compatible with Keysight 34401A, 34410A, 34411A, U3402A, U3606A digital multimeters

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Keysight Technologies, each probe provides much-needed precision.

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

Precisely measure the resistance of components with these multimeter leads from Keysight Technologies. For versatility, you can use this set of probes with either a bench or a handheld digital multimeter. The unit's banana plugs ensure a secure connection to your devices. There's also a ground guard connector to help protect against electrical hazards. The connectors are gold-plated for resistance to corrosion and high conductivity, ensuring a reliable connection. This material also ensures reduced contact resistance between your probe and component surfaces, so you can take measurements without the test leads affecting your readings.

• Flat tweezers with gripping surface for precise contact and accurate measurements
• Colour-coded leads and clips for a simplified set-up
• Cable length of 0.8m for a flexible connection

• Electrical testing
• Electronics assembly and repair
• Prototyping and research

This multimeter accessory set is safe for use with voltages up to 42V AC/DC, making it a good choice for use in low-power applications.

Yes, this probe set works with the B2900BL series source meter (210-0286) for ease of use.

Manufacturer’s Warranty

Keysight