Schutzinger SPL 7318 Ni / 1 / 100 /RT Test Probe, CAT IV, 16A
- RS 제품 번호:
- 144-1465
- 제조사 부품 번호:
- SPL 7318 Ni / 1 / 100 /RT
- 제조업체:
- Schutzinger
Subtotal (1 unit)*
₩23,255.60
일시적 품절
- 2026년 2월 12일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩23,255.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 144-1465
- 제조사 부품 번호:
- SPL 7318 Ni / 1 / 100 /RT
- 제조업체:
- Schutzinger
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Schutzinger | |
| Lead Type | Test Probe | |
| Product Type | Test Probe | |
| Connector Type | 4 mm Safety Plug | |
| Lead Length | 1000mm | |
| Current Rating | 16A | |
| Safety Category Voltage | 1000V | |
| Safety Category | CAT IV 1000V | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | +90°C | |
| Safety Category Level | CAT IV | |
| 모두 선택 | ||
|---|---|---|
브랜드 Schutzinger | ||
Lead Type Test Probe | ||
Product Type Test Probe | ||
Connector Type 4 mm Safety Plug | ||
Lead Length 1000mm | ||
Current Rating 16A | ||
Safety Category Voltage 1000V | ||
Safety Category CAT IV 1000V | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature +90°C | ||
Safety Category Level CAT IV | ||
- COO (Country of Origin):
- DE
Universally suitable because various contact tips can be interchanged in the probe holder for a wide variety of measuring functions.
Version with spring-loaded steel probe for pin-point measuring on printed boards. Together with the tip protection head also suitable for slip-proof use on components with DIL grid.
2 mm + 2.4 mm lamella-basket probes for measuring at terminal blocks.
Versions available as test probe with axial safety socket as well as with assembled test lead.
When worn, the test probe insets can be ordered separately. A cost-saving factor over a period of time as well as an environmental aspect.
Version with spring-loaded steel probe for pin-point measuring on printed boards. Together with the tip protection head also suitable for slip-proof use on components with DIL grid.
2 mm + 2.4 mm lamella-basket probes for measuring at terminal blocks.
Versions available as test probe with axial safety socket as well as with assembled test lead.
When worn, the test probe insets can be ordered separately. A cost-saving factor over a period of time as well as an environmental aspect.
관련된 링크들
- Schutzinger SPL 7318 Ni / 1 / 100 /SW Test Probe, CAT IV, 16A
- Schutzinger Test Probe, 1kV, 5A
- Schutzinger SPL2400 Test Lead Kit, CAT II, 10A
- Schutzinger Point Test Probe, 1kV, 32A
- Schutzinger RS SET SPL 7312 Test Lead Kit, CAT II, 16A
- Schutzinger Test Probe, 2mm Tip, 1kV, 4mm Socket
- Schutzinger Spring Loaded Test Probe, 2mm Tip, 1kV, 10A
- Schutzinger Spring Loaded Test Probe, 2mm Tip, 1kV, 4mm Socket
