제조사부품번호

Eaton XDP DOL Starter, DOL, 400V ac, 7.5 kW, 3 Phase, IP65

RS 제품 번호:: 528-7410
제조사 부품 번호:: 118531 XDP7,5/I(400V50HZ,440V60HZ)
제조업체:: Eaton

Eaton XDP DOL Starter, DOL, 400V ac, 7.5 kW, 3 Phase, IP65

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩641,220.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩641,220.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 528-7410
제조사 부품 번호:: 118531 XDP7,5/I(400V50HZ,440V60HZ)
제조업체:: Eaton

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Eaton
	Power Rating	7.5kW
	Product Type	DOL Starter
	Sub Type	DOL
	Number of Phases	3
	Mount Type	Surface
	IP Rating	IP65
	Number of Poles	3
	Overall Length	240mm
	Maximum Voltage	400V ac
	Standards/Approvals	No
	Overall Width	160mm
	Hazardous Area Certification	No
	Overall Depth	160mm
	Series	XDP

	모두 선택
	브랜드 Eaton
	Power Rating 7.5kW
	Product Type DOL Starter
	Sub Type DOL
	Number of Phases 3
	Mount Type Surface
	IP Rating IP65
	Number of Poles 3
	Overall Length 240mm
	Maximum Voltage 400V ac
	Standards/Approvals No
	Overall Width 160mm
	Hazardous Area Certification No
	Overall Depth 160mm
	Series XDP

COO (Country of Origin):: GB

EATON XDP DOL Starter Series with Isolator

Providing reliability and long operating life, these 'direct-on-line' starters are totally insulated with IP65 protection. Capable of high numbers of operations, these starters are constructed from standard components meaning they are very easy to maintain. Fitted with AC-3 rated triple pole contactor, AC-3 rated triple pole switch disconnector and on and off pushbuttons, these devices also allow for 3 padlocks for additional safety.

All starters in this range are wired to accept EATON overload relays for overload protection, also available from RS components to be purchased separately.

4 & 5.5kW models = H200 x W120 x D160mm, 7.5 & 11kW models = H240 x W160 x D160mm

Features and Benefits:

• Fitted with metric knockouts

• Easy maintenance

• Complies with IEE regulations

• 16th edition on isolation and switching

• Glass fibre reinforced polycarbonate casing

Applications:

Used for starting 3 phase induction motors, direct on line starters are regularly used in industrial applications such as conveyor belts, compressors and small water pumps.

What is the difference between dol and star delta starters?

Both devices are used to start induction motors however, where partial voltage is applied to each winding of a star delta starter, a DOL has 100% voltage applied. This also applies to the current, a star delta uses one-third of the starting current that a DOL does. Direct on line starters are the most common and simplest starting method, within a motor start-up they also provides the lowest temperature rise. Star delta starters allow for starting the motor at a lower voltage, making them suitable for high inertias.

Note

FLC figures quoted are maximum, other overload ratings can be used dependant on FLC rating.

Standards

IEC/EN 60529, DIN 43660, EN 50262