Schneider Electric TeSyS U Advanced Motor Starter, IP20

모든 Motor Starters 열람하기

Subtotal (1 unit)*

₩78,292.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 4월 27일 부터 17 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩78,292.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
493-9104
제조업체:
Schneider Electric
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Schneider Electric

Product Type

Advanced Motor Starter

Mount Type

Plug-in

IP Rating

IP20

Hazardous Area Certification

No

Standards/Approvals

RoHS, REACH, IEC 60529

Series

TeSyS U

제외

COO (Country of Origin):
FR

Parallel Wiring Module


It is possible using parallel wiring to connect a TeSys U starter to a PLC I/O module to transfer status and command information

Fits directly into a Power Base module

It must be used with a 24Vdc control Unit e.g Stock No. 493-8987 (LUCB 1XBL)

Each Module has 4 channels, 2 outputs for starter forward and reverse running,3 inputs for knob position, fault indication and position of poles

Interconnection to the PLC I/O module is via a RJ45 connector, ready leads are available e.g. Stock No. 493-9233 (LU9R03)

Schneider Electric TeSys U


The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

  • Faster design with fewer components needed

  • Quicker panel build with faster assembly time and fewer wires per starter

  • Space saving 45mm width up to 32A (even for reversing) allowing smaller panels

  • Flexible and upgradeable with plug-and-play function modules

  • Voltage and protection parameters can be determined after assembly and wiring

  • Broad band electronic control unit provides improved overload protection with fewer components

  • Expandable plug-and–play diagnostics

  • Total co-ordination for fast return to service after a short circuit fault

    • Tesys model U is easy to select:


    First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.

    Then choose the plug-in protection module by motor full load current and control voltage required.

    Additional plug in functions can be selected and added at any time.

    The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

    Warning

    Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.

    관련된 링크들