STMicroelectronics L6228PDTR, Stepper Motor Driver IC 36-Pin, SO-8
- RS 제품 번호:
- 188-8482
- 제조사 부품 번호:
- L6228PDTR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 2 units)*
₩24,141.00
재고있음
- 2,390 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 2 - 148 | ₩12,070.50 | ₩24,141.00 |
| 150 + | ₩11,768.25 | ₩23,536.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 188-8482
- 제조사 부품 번호:
- L6228PDTR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper | |
| Configuration | Full Bridge | |
| Mount Type | Surface | |
| Package Type | SO-8 | |
| Output Current | 1.4A | |
| Pin Count | 36 | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 52V | |
| Typical Switching Frequency | 100kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 16mm | |
| Height | 3.3mm | |
| Standards/Approvals | No | |
| Series | L6228 | |
| Automotive Standard | No | |
| Supply Current | 1.4A | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type Stepper | ||
Configuration Full Bridge | ||
Mount Type Surface | ||
Package Type SO-8 | ||
Output Current 1.4A | ||
Pin Count 36 | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 52V | ||
Typical Switching Frequency 100kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 16mm | ||
Height 3.3mm | ||
Standards/Approvals No | ||
Series L6228 | ||
Automotive Standard No | ||
Supply Current 1.4A | ||
The L6228 device is a DMOS fully integrated stepper motor driver with non-dissipative overcurrent protection, realized in BCD technology, which combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed to drive a two phase bipolar stepper motor including: a dual DMOS full bridge, the constant off time PWM current controller that performs the chopping regulation and the phase sequence generator, that generates the stepping sequence. Available in PowerSO36 and SO24 (20 + 2 + 2) packages, the L6228 device features a non-dissipative overcurrent protection on the high-side power MOSFETs and thermal shutdown.
Operating supply voltage from 8 to 52 V
2.8 A output peak current (1.4 A RMS)
RDS(ON) 0.73 Ω typ. value at Tj = 25 °C
Operating frequency up to 100 KHz
Non-dissipative overcurrent protection
Dual independent constant tOFF PWM current controllers
Fast/slow decay mode selection
Fast decay quasi-synchronous rectification
Decoding logic for stepper motor full and half step drive
Cross conduction protection
Thermal shutdown
Undervoltage lockout
Integrated fast freewheeling diodes
Application
Bipolar stepper motor
관련된 링크들
- STMicroelectronics, Stepper Motor Driver IC 36-Pin, SO-8
- STMicroelectronics L6470PDTR, Stepper Motor Driver IC 36-Pin, SO-8
- STMicroelectronics L6472PDTR, Stepper Motor Driver IC 36-Pin, PowerSO-36
- STMicroelectronics, Stepper Motor Driver IC 24-Pin, TFQFPN
- STMicroelectronics, Stepper Motor Driver IC 16-Pin, QFN
- STMicroelectronics, Stepper Motor Driver IC 36-Pin, PowerSO
- STMicroelectronics POWERSTEP01TR, Stepper Motor Motor Driver IC 89-Pin, VFQFPN
- STMicroelectronics STSPIN820, Stepper Motor Driver IC 24-Pin, TFQFPN
