Microchip ATA6847T-3333E/NHX, Brushless DC Motor Driver 40-Pin, VQFN
- RS 제품 번호:
- 352-173
- 제조사 부품 번호:
- ATA6847T-3333E/NHX
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 tape of 2 units)*
₩7,683.00
재고있음
- 3,300 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Tape* |
|---|---|---|
| 2 - 18 | ₩3,841.50 | ₩7,683.00 |
| 20 - 198 | ₩3,461.25 | ₩6,922.50 |
| 200 - 998 | ₩3,198.00 | ₩6,396.00 |
| 1000 - 1998 | ₩2,954.25 | ₩5,908.50 |
| 2000 + | ₩2,408.25 | ₩4,816.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 352-173
- 제조사 부품 번호:
- ATA6847T-3333E/NHX
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | DC Motor Driver | |
| Motor Type | Brushless | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 40 | |
| Output Current | 2A | |
| Maximum Supply Voltage | 42V | |
| Minimum Supply Voltage | 3V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 50kHz | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | ISO 26262:2018, ASIL B, SIL 2, RoHS, IEC 61508:2010 | |
| Height | 0.9mm | |
| Length | 5mm | |
| Supply Current | 15μA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type DC Motor Driver | ||
Motor Type Brushless | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 40 | ||
Output Current 2A | ||
Maximum Supply Voltage 42V | ||
Minimum Supply Voltage 3V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 50kHz | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals ISO 26262:2018, ASIL B, SIL 2, RoHS, IEC 61508:2010 | ||
Height 0.9mm | ||
Length 5mm | ||
Supply Current 15μA | ||
Automotive Standard No | ||
The Microchip 3 Phase Brushless Motor Gate Driver System Basis Chip (SBC) for brushless motor control, designed using advanced SOI technology. In combination with a microcontroller and six discrete power MOSFETs, the SBC forms a brushless DC motor control unit. Through six dedicated parallel inputs, the gate driver units (GDU) can be controlled independently, supporting duty cycle operations from 0% to 100%, due to the implementation of two charge pumps, for low and high-side gate drives. In addition, the circuit provides 5V and 3.3V low dropout voltage regulators, two current-sensing operational amplifiers, an integrated Back-EMF detection module and a window watchdog. The microcontroller controls the ATA6847 using an SPI interface.
Power supply voltage range from 3V to 42V
Sleep deep sleep mode with maximum 15 μA current consumption with full wake-up capability local wake-up
3.3V or 5V microcontroller interface
Up to 4 MHz SPI bus for device configuration and register access
SPI frame error detection
Dedicated NIRQ pin for MCU external interrupt to report events directly
관련된 링크들
- Microchip ATA6847T-3333H/NHX, Brushless DC Motor Motor Driver IC 40-Pin, VQFN
- Microchip ATA6847T-5050E/NHX, Brushless DC Motor Driver 40-Pin, VQFN
- Microchip ATA6847T-5033E/NHX, Brushless DC Motor Driver 40-Pin, VQFN
- Microchip ATA6847T-3333LH/ZWXVAO, Brushless DC Motor Motor Driver IC 48-Pin, VQFN
- Microchip ATA6847T-3333H/NHXVAO, Brushless DC Motor Motor Driver IC 40-Pin, VQFN
- Microchip ATA6847T-5033H/NHX, Brushless DC Motor Motor Controller 40-Pin, VQFN
- Microchip ATA6847T-5050H/NHX, 3 Phase Motor System Basis Chip 40-Pin, VQFN
- Microchip ATA6847T-5033H/NHXVAO, Brushless DC Motor Motor Controller 40-Pin, VQFN