TE Connectivity 1-Axis Screw Sensor 18 V 30 V, 2 Wire IEPE, TO-5, 3-Pin
- RS 제품 번호:
- 893-7266
- 제조사 부품 번호:
- 805-0050-01
- 제조업체:
- TE Connectivity
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩185,424.40
재고있음
- 추가로 2025년 12월 29일 부터 1 개 단위 배송
- 추가로 2026년 1월 05일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩185,424.40 |
| 5 - 9 | ₩179,859.60 |
| 10 + | ₩174,464.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 893-7266
- 제조사 부품 번호:
- 805-0050-01
- 제조업체:
- TE Connectivity
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | TE Connectivity | |
| Sensor Type | Accelerometer | |
| Product Type | Sensor | |
| Number of Axis | 1 | |
| Technology | Accelerometer | |
| Mount Type | Screw | |
| Interface Type | 2 Wire IEPE | |
| Maximum Frequency Response | 10000Hz | |
| Minimum Frequency Response | 0.3Hz | |
| Minimum Supply Voltage | 18V | |
| Maximum Supply Voltage | 30V | |
| Package Type | TO-5 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 100mV/g | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | CE, RoHS | |
| Height | 11.5mm | |
| Series | TO-5 | |
| Supply Current | 10mA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 TE Connectivity | ||
Sensor Type Accelerometer | ||
Product Type Sensor | ||
Number of Axis 1 | ||
Technology Accelerometer | ||
Mount Type Screw | ||
Interface Type 2 Wire IEPE | ||
Maximum Frequency Response 10000Hz | ||
Minimum Frequency Response 0.3Hz | ||
Minimum Supply Voltage 18V | ||
Maximum Supply Voltage 30V | ||
Package Type TO-5 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 100mV/g | ||
Pin Count 3 | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals CE, RoHS | ||
Height 11.5mm | ||
Series TO-5 | ||
Supply Current 10mA | ||
Automotive Standard No | ||
TE Connectivity 805 Series Accelerometer ICs
TE Connectivitys 805 Series of accelerometers offers two mounting configurations; adhesive mounting and stud mounting. 805 accelerometers combine 100% shielded housing with an integrated change converter amplifier and a piezo ceramic crystal that make them Ideal for OEM uses. Built on a 3-pin TO-5 header, it is available in ±50g and ±500g dynamic ranges and offers a flat frequency response to 15kHz. The accelerometer features a hermetic construction in a TO-5 header configuration.
• 2 wire IEPE Interface
• ±50g and ±500g Range
• TO-5 configuration
• Wide bandwidth up to 15kHz
• Hermetically Sealed
• Case grounded design
• -40°C to +100°C Operating Range
Applications
• Embedded sensing solutions
• Permanent structural studies
• Machine monitoring
• Low-cost OEM installation
Accelerometers, TE Connectivity
관련된 링크들
- TE Connectivity 1-Axis Screw Accelerometer 18 V 30 V, 2 Wire IEPE, TO-5, 3-Pin
- TE Connectivity 1-Axis Screw Accelerometer 3 V 5.5 V, 3 Wire, TO-5, 2-Pin
- TE Connectivity 1-Axis Screw Accelerometer 3 V 5.5 V, TO-5, 2-Pin
- TE Connectivity 3-Axis Surface Motion Sensor Module 1.5 V 5.5 V, 12-Pin
- TE Connectivity 1-Axis PCB Accelerometer 3 V 5.5 V, LCC, 10-Pin
- TE Connectivity 2-Axis Surface Accelerometer 3 V 5.5 V, 3 Wire, TO-5, 3-Pin
- Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, DFL, 12-Pin
- TE Connectivity 1-Axis Surface Accelerometer 2.8 V 5.5 V, Analogue, LCC, 10-Pin
