STMicroelectronics 3-Axis Surface Accelerometer, LGA, I2C, MIPI I3CSM, SPI, 14-Pin

모든 Motion Sensor ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩23,755.68

Add to Basket
수량 선택 또는 입력
재고있음
  • 236 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 49₩23,755.68
50 - 499₩23,280.04
500 - 999₩22,813.80
1000 - 2499₩22,356.96
2500 +₩21,909.52

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
265-1030
제조사 부품 번호:
ASM330LHBTR
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Sensor Type

Accelerometer, Gyroscope

Number of Axis

3

Technology

3 Axis 12-bit Accelerometer

Mounting Type

Surface

Interface Type

I2C, MIPI I3CSM, SPI

Package Type

LGA

Pin Count

14

COO (Country of Origin):
MT

High-accuracy automotive 6-axis inertial module for car electronic control units with ASIL-B certification


The ASM330LHB is a system-in-package featuring a 3-axis digital accelerometer and a 3-axis digital gyroscope with an extended temperature range up to +105 °C.

A safety manual and a software library, certified according to ISO26262:2018, are provided to support the development of applications using the ASM330LHB and targeting ASIL-B requirements.

ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer market. The ASM330LHB is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level.

The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element.

The ASM330LHB has a full-scale acceleration range of ±2/±4/±8/±16 g and a wide angular rate range of ±125/±250/±500/±1000/±2000/±4000 dps that enable its usage in a broad range of automotive applications.

The device supports dual operating modes: high-performance mode and low-power mode.

All the design aspects of the ASM330LHB have been optimized to reach superior output stability, extremely low noise, and full data synchronization to the benefit of sensor-assisted applications like dead reckoning and sensor fusion.

The ASM330LHB is available in a 14-lead plastic land grid array (LGA) package.

Key features


  • AEC-Q100 qualified

  • Extended temperature range from -40 to +105 °C

  • Embedded compensation for high stability over temperature

  • Android compliant

  • Accelerometer user-selectable full scale up to ±16 g

  • Extended gyroscope range from ±125 to ±4000 dps

  • Dual operating modes: high-performance and low-power mode

  • I²C, MIPI I3CSM, and SPI serial interfaces

  • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms

  • Programmable finite state machine

  • Machine learning core

  • Smart programmable interrupts

  • Embedded 3 KB FIFO available to underload host processor

  • ECOPACK and RoHS compliant

    • For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


    관련된 링크들